Earnings call
Dhabriya Polywood Q4 FY24 earnings call
By DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person.
Transcript filed .
Order book for project-related business, including PVC Windows and Modular Furniture, represents about 40% of its revenue, while regular dealers and distributors account for the remaining 60%. The company expects to increase fluted panel market volumes to INR100 crores in another 3 years; this is an internal projection, not guidance. With the Bangalore project implementation, Dhabriya Polywood Limited's overall capacity would come to around 24,000 metric ton per annum for exclusion; Dhabriya Polywood Limited has around 24,000 tons per year of PVC profile extrusion capacity. Consolidated revenue was INR212 crores in FY24, up 24% from INR171 crores last year.
The numbers management gave
Results
- Consolidated revenue was INR212 crores in FY24, up 24% from INR171 crores last year.
Show source
Consolidated revenue for the FY24 stood at INR212 crores, an increase of 24% compared to INR171 crores last year.
- Consolidated EBITDA was INR31 crores in FY24, up 68%.
Show source
Consolidated EBITDA for the year stood at INR31 crores, that is up by 68%.
- Consolidated PAT was INR14 crores in FY24, up 66%.
Show source
Consolidated P AT showed an increase of 66%, which is INR14 crores in FY24.
- EBITDA margins improved by 390 basis points and PAT margins improved by 170 basis points in FY24.
Show source
We have seen a margin improvement of 390 basi s points in EBITDA margins and 170 basi s points in P AT margins.
- Fluted panel revenue was INR30 crores in FY24.
Show source
Hitesh Agarwal: Yes, fluted panel this year is INR30 crores.
- The company used 66% of its capacity this year.
Show source
This year we have used 66% of our capacity.
What it expects ahead
What management expects
- The company expects to increase fluted panel market volumes to INR100 crores in another 3 years; this is an internal projection, not guidance.
Show source
In another 3 years we are quite comfortable that we can increase the volumes of this fluted panel market u p to INR100 crores.
- The company anticipates continued growth from strategic market penetration and expansion across India. Replaced by a later filing.
Show source
With strategic market presentation, penetration, and expansion across India, we anticipate continued growth.
Orders
- Order book for project-related business, including PVC Windows and Modular Furniture, represents about 40% of its revenue, while regular dealers and distributors account for the remaining 60%.
Show source
Plus, for our project -related business, including PVC Windows and Modular Furniture, this order book represents about 40% of our revenue, with the remaining 60% coming from regular dealers and distributors.
What it is building and selling
Projects and capacity
- With the Bangalore project implementation, Dhabriya Polywood Limited's overall capacity would come to around 24,000 metric ton per annum for exclusion; Dhabriya Polywood Limited has around 24,000 tons per year of PVC profile extrusion capacity.
Show source
Digvijay Dhabriya: We have around 24,000 tons per year extrusion of PVC profile.
- The company will add more than 10% to 20% additional PVC profile extrusion capacity this year.
Show source
And we will add on some additional capacity in this, more than 10% to 20%.
Risks, rules and outside factors
Outside factors
- The company may revise its sales price if PVC price increases remain continuous, to maintain margins as per its projections.
Show source
But if it remains continuous, then definitely we have the choice to revise our sales price also so that we can maintain our margins as per our projections.
What the company said on its earnings call, taken from its own transcript. Not advice.
Questions and answers
Question
Bhavesh Chauhan: Hi sir. So my question was, your employee cost as a percentage of revenues, when I compare with one of your peers, Kaka Industries, their employee cost as a percentage of sales is around 6% and we are at 10%. I think we are even higher, not 10%. I think it's around 16%. So what is the reason and should it fall going forward as we grow sales?
Answer, digvijay dhabriya
Digvijay Dhabriya: We are working on this and with the increased volumes because we are continuously engaged in the research and development, you see most of the new trends we are inventing. So we have a large number of tool development and new product development is going o n. So we are first in developing all the fluted panels and bringing the marble sheet in India. So we have a big R&D capacity. So these are the things which are increasing our cost. But at the same time, we are becoming a market leader because of our abilities in this research and development side.
Question
Bhavesh Chauhan: Okay. So how much we spend on research and development in absolute amount per year?
Answer, digvijay dhabriya
Digvijay Dhabriya: That is, we have not yet computed properly but because we are developing new tools and this is a part of the capital expenditure and some part, we cannot say that everything is coming under the research and development. Because we are developing the tools and new dyes and research and development is keep on going. That is a part of the work also.
Question
That is very short. And with what is the sustainable operating margins?
Answer, hitesh agrawal
Hitesh Agrawal: Hi. Hitesh Agrawal this side. See regarding margins, this year we have put lot of efforts on controlling our cost and improving the margins with other means also. So we can say around 14- 18% is the current range for the margin in our line of business.
Question
Bhavesh Chauhan: Right. And what is the kind of capital expenditure that we will spend in let's say coming 2 -3 years?
Answer, hitesh agrawal
Hitesh Agrawal: See capital expenditure in last 2-3 years of our financials, we have done lot of capex in building the capacities related to our extrusion plant particularly. Last year we have added lot of capacities in Coimbatore plant and this year, in fact it is alread y done for our Bangalore plant also. From this quarter we are operating our Bangalore facility also for extrusion. So next 2-3 years we are not looking as of now for any major expansion because we have already built it. So now we have to monetize all those things in terms of revenue. Regular capex you can say around INR8-INR10 crores, but it is regular capex because we are running around 5 plants. So certain maintenance kind of capex and new technologies come so we have to go for the capex and all.
Answer, hitesh agrawal
There is no major capex are not planned as of now.
Question
Bhavesh Chauhan: And sir on your peer, which is the company that is most efficient or something you might feel like industry leader in the segment that you operate?
Answer, hitesh agarwal
Hitesh Agarwal: We are basically into three kinds of products. One is the extrusion PVC profiles. As of now there is no peer except Kaka. Kaka is one who has come last year. So they are one where we can compare the extrusion activity. The other thing is the UPVC windows and doors. Fenesta which comes from the DCM Shriram Group, they are the basically trade leader in that.
Answer, hitesh agarwal
And they are the only one in listed peers basically as of now. Other than that in the furniture segment there are several companies, but not exclusively in furniture line. So for example this Asian Paints they are also in mod ular kitchens and wardrobes and other is godrej is also there. So exclusive peers are not there basically.
Question
Mahesh Atul: Sir, what was the out of INR212 crores revenue that you have reported how much was fluted panel?
Answer, hitesh agarwal
Hitesh Agarwal: Yes, fluted panel this year is INR30 crores.
Question
Mahesh Atul: How much INR30 crores?
Answer, hitesh agarwal
Hitesh Agarwal: Yes, actually that market for this fluted panel acce ptance is increasing day by day, but we are putting a lot of efforts also. In fact in the earlier question Bhavesh ji was asking about the higher employee cost. So that is also one reason we have recruited a lot of persons in our sales team also. We are expanding our geographical coverage also. So market response is very good and that is the reason we have seen good volumes in second half also.
Question
Mahesh Atul: And what kind of margins do you see in this fluted panel segment?
Answer, hitesh agarwal
Hitesh Agarwal: See fluted panel definitely is better as compared to the traditional product or other products door or other profiles. So that is the reason we are more focused on fluted sales. We can say around 3% to 4% higher margin we can get when we sell this fluted panel as compared to other excluded profiles.
Question
Mahesh Atul: And what is the peak capacity for this fluted panel that you have like on the revenue terms?
Answer, hitesh agarwal
Hitesh Agarwal: See fluted panels it is basically part of our extrusion capacity. See extrusion we are having more than 500 different boards. So as of now we are ex truding fluted panels at two facilities, Jaipur and Bangalore. And from this quarter we are starting sorry currently we are doing that Jaipur and Coimbatore. And from this quarter we are starting Bangalore also. So capacity is huge basically in terms of revenue. There is no limitation as such.
Answer, hitesh agarwal
If we have the order for the fluted panels we can even shift the door profile capacity to the fluted panels. It is all about the total installed capacity in terms of metric terms.
Question
Mahesh Atul: Okay, got it. That is okay and coming to this INR140 crores revenue, I mean the order book. So how much of this is in extrusion?
Answer, hitesh agarwal
Hitesh Agarwal: See this order book is basically related to our project business. When we say our project business it is related to UPVC w indows and modular furniture for the development developers. So that business is around 40% of our overall top line. See 60% is coming from the extrusion business which is our B2B business. There is no long -term order book is maintained. It's regular orders are coming and we are executing it to our dealers and distributors. So this INR140 crores represents 40% of our top line related to UPVC Windows and modular furniture, modular kitchen, wardrobe.
Answer, hitesh agarwal
So it's not related to the extrusion basically. Extrusion business is a regular routine business. So on daily basis we used to get the order and get it executed maximum within 7 days' timeline.
Show 20 more questions
Question
Mahesh Atul: Alright, my last question if I can squeeze in. Sir, can you please just throw some light exactly like what exactly this fluted panel what I think is that it's a very premium product in the extrusion segment and in a broader perspective the usage of it is still very under, I mean people not having much knowledge on it. Dhabriya Polywood Limited May 24, 2024 Page 6 of 19 So what are we doing to get this thing on the ground and how exactly you see the traction. I mean how exactly people are actually coming forward to use this thing. So can you please just throw some light on the mar ket itself of this fluted panel b ecause you say that it's the mar ket leaders there so that's why?
Answer, digvijay dhabriya
Digvijay Dhabriya: That's why the simple thing is the education. This product fluted panel is basically a replacement for the wall panel ling and the paint industry segment. So we are looking for some part of that industry and everywhere nowadays the interior, this fluted panel is a part of the interior designing of every house, every hotel, every office. So the very big market we are anticipating a very big market requirements to come in the next coming time and a lot of new designs are also design and colors are required by the market. So this is a developing segment and we hope that this segment will create some revolution in the market construction industry demand also.
Question
Manan Madlani: Across all products. I mean, I don't think we are maintaining volume growth for modular furniture, but for PVC profile and UPVC would be fine.
Answer, hitesh agarwal
Hitesh Agarwal: For this PVC profile that extrusion plant that volume growth in Q4 see in the entire year we say 15% additional capacity utilization is there in this year.
Question
Manan Madlani: Yes.
Answer, hitesh agarwal
Hitesh Agarwal: Volume growth for the PVC extrusion you are asking that only or anything else you are asking.
Answer, hitesh agarwal
Hitesh Agarwal: Extrusion last year capacity utilization was around 66% for the whole year.
Question
Manan Madlani: And in this fluted panel you earlier guided for INR100 crores top line by 27 and we have already achieved INR30 crores in this year. So, do you think we need to make any revision in the guidance?
Answer, hitesh agarwal
Hitesh Agarwal: It was not the guidance basically. We have our internal projections. In another 3 years we are quite comfortable that we can increase the volumes of this fluted panel market u p to INR100 crores. So, at this speed the market is increasing definitely it will be more, b ut we have not quantified it in terms of the guidance basically as of now because last year we have planned for around INR25 crores of business initially, but we were able to cross INR30 crores. So, market acceptance is increasing. We are also putting our efforts in promoting this product , showcasing this through our showrooms and exhibitions, participation in digital modes also. So, everything is happening now.
Answer, hitesh agarwal
Definitely the product acceptance the way it is improving volumes will definitely be plus.
Question
Manan Madlani: The next question would be on the PVC pricing. Can you just explain how it is behaving currently and in this quarter we achieved 49% on a gross margin basis. So, what would be the going forward tax number for this year or maybe the next year?
Answer, hitesh agarwal
Hitesh Agarwal: The pricing of PVC remains a little bit fluctuating. We can say in a year, two or three times, there are scenarios when it goes up and when it comes down. Looking to the overall world scenario and the demand from the real estate and the European market for the PVC, we don't foresee any major changes in PVC rates. Yes, definitely, since the last one or two weeks, there has been some fluctuations in the PVC prices. That is -- that we see it as a temporary phase due to certain logistic issues from China and some other countries. So, the PVC prices have been revised by market leaders once or twice. But it seems to be for one month or two months.
Answer, hitesh agarwal
But if it remains continuous, then definitely we have the choice to revise our sales price also so that we can maintain our margins as per our projections.
Question
Manan Madlani: Okay. And the last question would be, the Supreme Industry has recently announced that they are coming into UPVC window segment. So, there is already Fenesta in that segment. So, do you see, going forward, any pricing pressure from these competitors? Management: No, we don't see. In fact, we take it in a positive way. The more and more large corporates comes into the trade, definitely it will be a positive scenario for the established players because it's not Dhabriya Polywood Limited May 24, 2024 Page 8 of 19 going to put pricing pressure on us. In fact, we will be adding certain edges only because their cost of sales is definitely higher than at what rate we can sell it. In
Answer, digvijay dhabriya
Digvijay Dhabriya: Bring more awareness among the customers.
Question
Sanjeev Damani: Congratulations, sir, for a fine set of numbers produced in this year and quarter. Actually, I would like to have some basic understanding of the things. So, when we say PVC profiles, is it a plywood sheet like 8x4 plywood sheet that we manufacture and sel l or we make ready-to-use products only?
Answer, digvijay dhabriya
Digvijay Dhabriya: No, no. It is a different kind of section for the different uses. Just like the door chocker, there is one section. For the door frame, there is another section. So, if you cut it across, it is a section and a regular extrusion, a regular section is drawn with the PVC material for that particular use.So, this is what the PVC extrusion is. Just li ke pipe extrusion, this is a shape extrusion for different uses. Management: So, it's not like a plywood sheet 8x4 which will be used by the carpenter to make his own thing. We make ready things to be used by the user.
Answer, digvijay dhabriya
Digvijay Dhabriya: We are just extruding these stoner sheets. These are the marble sheets where we are using the marble dust and PVC mix for extrusion and this is for the wall coverings and this is also used for the SPC flooring. Okay. So, this is SPC. So, these are the sheets which are extruded in 4x8 size and they are used on the wall. And we are developing some new designs and new colo urs and new uses in this line also. Okay.
Question
Stone Plastic Composite. Very nice, sir. So, now I want to understand that how much tonnage capacity that we have of PVC extrusion or PVC profile making. Can I understand this?
Answer, digvijay dhabriya
Digvijay Dhabriya: We have around 24,000 tons per year extrusion of PVC profile.
Question
Sanjeev Damani: So, this includes all our factories right now…?
Answer, digvijay dhabriya
Digvijay Dhabriya: Yes. And we are expanding at Bangalore for additional capacities.
Question
Sanjeev Damani: So, this expansion will be complete during this year?
Answer, digvijay dhabriya
Digvijay Dhabriya: This year almost it is completed and we are adding some new products also and some new machines also.
Question
Sanjeev Damani: So, this 24,000 will go up in this year?
Answer, digvijay dhabriya
Digvijay Dhabriya: Yes. And we will add on some additional capacity in this, more than 10% to 20%.
Question
Sanjeev Damani: Okay. That will get added. And now coming to utilization and comparison from last year to this year. Last year how much we produced tonnage and this year how much tonnage we produced?
Answer, digvijay dhabriya
Digvijay Dhabriya: We have used over 55% of the capacity.
Question
Sanjeev Damani: Okay.
Answer, digvijay dhabriya
Digvijay Dhabriya: Last year and this year we are expected. This year 66%. This year we have used 66% of our capacity.
Question
Sanjeev Damani: Now I am coming to one more question. I am given to understand that few competitors are there. But in organized sector also lot of people are there in this line or majorly Fenesta which we talked about. Earlier it was once upon a time Si ntex also used to do all these act ivities. And as you said Astral has also entered in these days. Am I right, sir? That Sintex also used to do this earlier?
Answer, digvijay dhabriya
Digvijay Dhabriya: A lot of European players are now entering into the market.
Question
These are the things which were being manufactured by I think Sintex also. And today your immediate competitors are those people who have taken over Sintex also these days. S intex factories have been taken over by some other group. I don't recollect who has taken over.
Answer, digvijay dhabriya
Digvijay Dhabriya: Yes, Wellspun has taken over.
Question
Bhavesh Chauhan: Okay. In terms of our exposure, is it more tilted towards affordable housing? Management: Not exactly affordable housing. Our overall revenue comes from 3 different verticals. B2B business accounts for around 60% of the top line. So that is purely through dealers and distributors who basically execute the work of installing PVC doors, wall sealing, wall panelling, or other interior work at the consumer end. That is the 60%. And the remaining 40% out of that also, we can say around 25% comes from the retail business related to new PVC windows or modular furniture, B2B sales. Only 30% business comes from the project side. So that project side is also not affordable as such. We
Answer, digvijay dhabriya
So the labor is also very costly and not available, the trained labor is also not available. So all the substitute materials are gaining momentum. So we see a very good future of our products. And as they are very cost effective, they are very easy to maintain, and they are all 100% recyclable and environment friendly. So they are attracting all the youth and new markets.
Question
Lucky Banwani: It's like that you are committed to them that at whatever time you have given them commitment, you are fulfilling their order. Management: Yes, definitely. We have done it. We have been doing this for DL F and other builders for the last 10-15 years. In fact, for DLF, we did our first project in 2014. And currently, we have orders for 10 different projects.
Answer, digvijay dhabriya
Digvijay Dhabriya: It's all about execution and executing at the right time with the right quality.
Question
Lucky Banwani: Yes. Sir, my next question is for DSTONA segment. Like your Polywood segment and like your Dynasty modular furniture segment, your DSTONA is not growing segment like your Polywood and Dynasty segment. What is the reason behind that?
Answer, digvijay dhabriya
Digvijay Dhabriya: DSTONA was a SPC, Stone Plastic Composite product. What we feel is that we came earlier than the market requirements. So, we put a lot of effort in educating the market and the market is growing. But, I think in the coming years, DSTONA will be in high demand. Because now, a lot of people are asking about it and a lot of demand we are getting. The market is inquiring and a lot of demands are coming.
Question
Lucky Banwani: Yes, I have seen your marble sheets.
Answer, digvijay dhabriya
Digvijay Dhabriya: As and when the demand will come, we have the capacity. We are promoting it and I hope in the coming time, this product will get good momentum.
Question
Rohit Shah: Thank you.
Answer, digvijay dhabriya
Thank you all for participating in this earnings con call. I hope we have been able to answer your questions satisfactorily. If you have any further questions or would like to know more about the company, please reach out to our investor relations managers at X-B4advisory. Thank you. Stay safe and healthy. Thank you.
Questions about this call
- When was the Dhabriya Polywood Q4 FY24 earnings call transcript filed?
- Dhabriya Polywood filed the transcript with the exchange on 28 May 2024. This page is built from that transcript.
- What does this page list?
- 12 statements from the transcript across 5 topics, 9 of them with a figure. Each statement is shown with the transcript sentence it came from.
- Are the analysts' questions included?
- Yes. 30 questions and management's answers are listed in the order they were asked, as the transcript prints them.
- Who wrote this page?
- DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.