Earnings call
Dhabriya Polywood Q2 FY25 earnings call: Dhabriya Polywood Limited's order book related to Furniture and UPVC was around 30%-32% of the company's overall top line
By DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person.
Transcript filed .
Order book related to Furniture and UPVC was around 30%-32% of the company's overall top line. Business projections remained on a plan of 25% year-on-year growth for the next four years. Consolidated revenues were INR116.7 crores in the half year ended September 30, 2024, up 11.4% from INR104.8 crores in the same period last year. The company estimated a market of around 300 crore rupees for Soffit and hoped to gain a good percentage of total sales from it.
The numbers management gave
Results
- Consolidated revenues were INR116.7 crores in the half year ended September 30, 2024, up 11.4% from INR104.8 crores in the same period last year.
Show source
Highlights on business operations for H1 FY25, consolidated revenues stood at INR116.7 crores and increased by 11.4% compared to INR104.8 crores in the same period last year.
- Consolidated EBITDA was INR18.4 crores in the half year ended September 30, 2024, up 27%, and consolidated PAT was INR8.8 crores, up 32.1%.
Show source
Consolidated EBITDA stood at INR18.4 crores that is up by 27% and consolidated PAT show an increase of 32.1% which is INR8.8 crores.
- EBITDA margin improved by 200 basis points and its PAT margin improved by 120 basis points in the half year ended September 30, 2024.
Show source
Page 2 0f 13 s (REE & N 3 Digvijay Dhabriya: ‘DHABRIYA Dhiabriva Polywood Limited GROUP November 14, 2024 We have seen margin improvement of 200 basis points in EBITDA margin and 120 basis in PAT margin.
- Consolidated revenues were INR58.1 crores in Q2 FY25, up 6.2% compared with INR54.7 crores in the December period last year.
Show source
For Q2 FY25, consolidated revenues stood at INRS8.1 crores and increased by 6.2% as compared to INR54.7 crores in December period last year.
- Consolidated EBITDA was INR9.2 crores in Q2 FY25, up 20.8%, and consolidated PAT was INR4.2 crores, up 16.6%.
Show source
Consolidated EBITDA stood at INR9.2 crores that is up by 20.8% and consolidated PAT showed an increase of 16.6% which is INR4.2 crores.
- EBITDA margin improved by 190 basis points and its PAT margin improved by 60 basis points in Q2 FY25.
Show source
We have scen margin improvement of 190 basis in EBITDA margin and 60 basis in PAT margin.
Show 13 more statements
Results
- Performance in Q2 FY25 was impacted by an extended rainy season lasting almost 1.5 months longer than in previous years, leading to relatively flat growth.
Show source
This quarter performance was impacted by an extended rainy season spending almost 1.5 months as compared to previous years, leading to a relatively flat growth.
- PVC Profile segment revenue was INR66.9 crores in H1 FY25 compared with INR63 crores in H1 FY24, an increase of 6.1%.
Show source
Revenue stands at INR66.9 crores for HI FY25 compared to INR63 crores in HI FY24, a 6.1% increase.
- PVC Profile segment contributed about 57% to overall topline in H1 FY25.
Show source
This segment contributes about 57% to overall topline of this period.
- UPVC Windows segment revenue was INR29.4 crores in H1 FY25 compared with INR26.3 crores in H1 FY24, an increase of 11.5%.
Show source
UPVC Windows, Revenue stands at INR29.4 crores in H1 FY25 compared to INR26.3 crores in H1 FY24, a 11.5% increase.
- UPVC Windows segment contributed about 25% of topline in H1 FY25.
Show source
This segment contributes about 25% of topline.
- Modular Furniture segment contributed 18% to topline in H1 FY25.
Show source
This segment contributes 18% to our topline in this period.
- Fluted panel sales were around INR19 crores in the first half, compared with INR30 crores in FY24.
Show source
And in the first half itself, the fluted panel sales was around INR19 crores as compared to the INR30 crores or in the FY24.
- The company achieved 2%, 2.5% extra margin in the quarter, partly due to stable raw material pricing and partly due to revenue additions from high-value, high-margin products.
Show source
So we have been able to have some 2%, 2.5% extra margin in this quarter.
- Modular furniture contributes about 18% of the company's overall revenues, and its margins are 5%-7% lower.
Show source
Because I said that 5%-7% and that contribution of this modular furniture is slightly lower in our overall revenues, about 18%.
- Modular furniture has no rated capacity; its utilization is estimated at around 70% based on current revenue.
Show source
So based on the current revenue, we can say around 70% of capacity we are utilizing.
- Modular furniture vertical recorded growth of 32.7% this quarter.
Show source
However, demand remained strong, particularly in our Modular Furniture vertical which recorded a growth of 32.7% this quarter.
- Demand from sites where it was working slowed because the extended rainy season in Rajasthan and the Delhi NCR area lasted until the end of September rather than usually ending by mid-July.
Show source
So that causes a little bit of slow demand from the sites where we have been working.
Money and capital
- The company has not added new debt, and both long-term and short-term debt have reduced through the first half of the year.
Show source
So there has been a reduction in both long-term and short-term debts.
What it expects ahead
What management expects
- The company expected fluted panel sales of around INR40-INR45 crores this year.
Show source
So we are expecting around INR40-INR45 crores sales for the fluted panel itself in this year.
- Business projections remained on a plan of 25% year-on-year growth for the next four years.
Show source
So for the whole year business projections, we are sticking to the growth plan, what we have carlier shared of 25% year-on- year growth for the next four years.
- The company hoped to launch an outdoor UV-resistant Soffit Panel in the next six months.
Show source
So we hope that in the next six months, we will launch the outdoor UV-resistant Soffit Panel also.
- The company expected the same kind of growth in Modular Furniture for the entire year going forward, in view of its order book and export potential to Europe, where it had started exporting Modular Furniture.
Show source
And we expect the same kind of growth in modular furniture for the entire year going forward.
- The company is focusing on exports in modular furniture, and the increased business will give it an edge on gross margin; it is working to improve modular furniture margins to the level of its PVC and UPVC verticals and does not expect modular furniture growth to adversely affect margins.
Show source
So there will not be an adverse effect on the margins going forward with the growth in the modular fumiture business.
Orders
- The company had an order book of about INR135 crores plus for its project-related business, mainly UPVC Windows and Modular Furniture projects, for the project side only.
Show source
We are currently having an order book of about INR135 crores plus for our project related business, which is mainly related to UPVC Windows and Modular Fumiture projects for the project side only.
Show 3 more statements
Orders
- Order book related to Furniture and UPVC was around 30%-32% of the company's overall top line.
Show source
That is around 30%-32% of the overall top line of the company.
- Current order book was around 135 crores, and the company booked further orders of INR7-INR8 crores after September end, taking the current order book to around INR140 crores.
Show source
INR140 crores of order book in the current scenario we are having.
- Project orders have contractual timelines ranging from 6 months to 2.5 years, depending on project timelines.
Show source
Different orders, 6 months to 2.5 years.
What it is building and selling
Projects and capacity
- The company started manufacturing Soffit Panels, single-layer fall ceiling and wall paneling panels, at its Bangalore facility.
Show source
Additionally, we are pleased to announce that we have started manufacturing of Soffit Panels, that is basically single-layer fall ceiling and wall paneling panels at our Bangalore facility.
- The company introduced two Soffit Panel designs and planned to launch five more designs for fall ceiling; it was also working on outdoor Soffit Panels for building facades.
Show source
And this is the section where we have introduced two different designs and soon, we are going to launch five more new designs for fall ceiling and we are working on outdoor Soffit Panels also for the outdoor usage for the facade of a building.
Demand and pricing
- The company estimated a market of around 300 crore rupees for Soffit and hoped to gain a good percentage of total sales from it.
Show source
Right now, we are estimating around 300 crore rupees of market for the Soffit and we are hoping that we will gain a good percentage of the total sale out of it.
Segments
- The company started manufacturing Soffit panels last month and has received a very good response.
Show source
In Page 8 0f 13 s (REE ' 4 3 GROUP Moderator: Arman: Hitesh Agarwal: Arman: Hitesh Agarwal: Moderator: Manan: Hitesh Agarwal: ‘DHABRIYA Dhiabriva Polywood Limited November 14, 2024 fact, last month only we started this Soffit manufacturing and the response is really very good.
- The company started manufacturing single-layer Soffit panels in India as a new product intended to take some share of fall ceiling wall panelling.
Show source
So we are into this extrusion, we have taken one step forward and started it as the first one in India.
- The company opened a showroom in Andheri, at Lakshmi Industrial Complex, and a depot warehouse in Bhiwandi.
Show source
And that depot warehouse we have opened in the Bhiwandi.
Everything else said on the call
What management stressed
- The company focused on maintaining at least 35% plus gross margin and priced its products accordingly across all verticals.
Show source
But yes, our focus is to maintain at least 35% plus gross margin.
- The company was shifting from low-margin products to high-margin products and was more aggressive in doing so. Replaced by a later filing.
Show source
We said that we are shifting from the low-margin products to high-margin products.
What the company said on its earnings call, taken from its own transcript. Not advice.
Questions and answers
Question
So we are not forcing any kind of the major price fluctuations in PVC or ofher related products, which are our main raw materials. So until and unless there is any unexpected thing happens on the global front. Otherwise, prices are compatible. Okay, and you are confident with maintaining EBITDA margin of 15% plus for the second half of the year and for FY26? Yes, in fact, our entire team at all levels, they have been ready to work hard and to, in fact to improve this level. With the increased top line, what we are expecting as compared to H1. So there should be improvement on that, further improvement. Okay, and last question on the fluted panel. So if T remember correctly, our target was to
Answer, hitesh agarwal
Currently, it is slightly lower in the fumiture segment, but going forward, it will increase. So its in the range, you can say around 40%-47% range of ‘margin for different product verticals. ‘What happens, because what I was seeing in your presentation is that you guys are deliberately moving towards, you see a lot of growth coming in modular furniture. Is it right to assume that when our tumover would be increasing in this particular segment, this would reflect in the margins too? Because when you say modular furniture is on a lower margin base, do you really think that the margins might go up from here? No, it's not being lower to that extent, which can affect the overall margin of the company. Because I said that 5%-7% and that contribution of this modular furniture is slightly lower in our overall revenues, about 18%. So gradually it will increase.
Answer, hitesh agarwal
But once, as I said in modular furniture, in earlier communications also, we have shared that we are focusing on the exports, particularly in this modular furniture that is increasing. And the increment increased business, definitely on the gross margin front also, we will have certain edge. And in modular fumiture also, we are working hard to improve our margins at the par level of the PVC and UPVC verticals. So there will not be an adverse effect on the margins going forward with the growth in the modular fumiture business. Coming to fluted panels, we sce that the biggest player in the market is AGT, if I am not wrong. So that is being imported currently or they must have one unit here, I don't know exactly. AGT?
Answer, hitesh agarwal
AGT. In fact, we haven't heard about the AGT fluted panels. AGT used to be the suppliers of the high-gloss MDF boards, basically. We used to... Ground check we have found that AGT is supplying it in the South market. So we just wanted your view that coming to these players who are dumping their goods in Indian markets, how fast competitive are they? Because we sce a lot of fluted pancl players coming into India, dumping a lot of product into the decorative market segment.
Answer, hitesh agarwal
This is from China. Domestic market will definitely have an edge over the imported market in terms of different issues. In imported materials, they have the limitations of the range, they have the limitation of the sizes. But when it is domestically manufactured, because every building has a different height and width. So usually in the interior, we don't want any kind of joints and all. So here in India, we can produce as per the requirement. So that gives a perfect edge to compete with the international players.
Answer, hitesh agarwal
Yes, AGT is out there, but in this Soffit panels, some PARE is there, then one Vox is there. So they are the players and they are doing very good business in Soffit, but both are imported. In Page 8 0f 13 s (REE ' 4 3 GROUP Moderator: Arman: Hitesh Agarwal: Arman: Hitesh Agarwal: Moderator: Manan: Hitesh Agarwal: ‘DHABRIYA Dhiabriva Polywood Limited November 14, 2024 fact, last month only we started this Soffit manufacturing and the response is really very good.
Answer, hitesh agarwal
So we don't see any kind of competition from the imported panels or the dumping materials. Sorty to interrupt you sir. I would request you to rejoin the queue for your follow-up question. Thank you. The next question is from the line of Armaan from Blue Sky Capital. Please go ahead. Yes, thanks for the opportunity.
Answer, hitesh agarwal
I want a bit of more color on your new product of single layer phone ceiling. Can you talk more about it? What is the product like? I mean, what it is replacing with and what are the qualities? And one of the also thing that you told that you are the first company to produce domestically. So, what has been a key barrier before that, that why 1o one has started producing it domestically? And what advantage now you get that at this junction, you will start manufacturing and it will have an edge over others?
Answer, hitesh agarwal
See, Soffit panel, as we said that it's a single layer profile. In extrusion, normally whatever the profile was earlier existing in Indian manufacturing industry, that was a multi-layer follow profiles. So this single layer profile, as mentioned by CMD sir also, it is more used in the Europe and US to innovate their houses and all. So this product was required certain specific ‘machinery toolings and certain product mix also. See, I cannot comment on why the other players have not started this in India. Since we are into this industry from last 32 years, when we sce that this can be a new product which takes some share of the fall ceiling wall pancling. So we are into this extrusion, we have taken one step forward and started it as the first one in India.
Answer, hitesh agarwal
It has very wide range of color, finishes and designs. Yes, others are also having, but when imported, any importer, it is really tough to maintain the large number of inventories. Because again, when we are manufacturing domestically, we can produce as per the requirements. So we do not keep finished inventory of different colors. Only the raw materials are maintained in the different finishes, prints and designs. Correct. Got it.
Answer, hitesh agarwal
Sir, I had a few questions. First one is, what are our capacity utilization levels? Please can you answer that? The capacity utilization for this PVC profile is around 50%-55%. And UPVC in the range of around 30%. So that is the current capacity utilization. Modular furniture, there is no rated capacity.
Answer, hitesh agarwal
It is on the basis of the revenue only. So based on the current revenue, we can say around 70% of capacity we are utilizing. Page 9 0f 13 s (REE ' 4 3 Manan: Hitesh Agarwal: Manan: Hitesh Agarwal: Manan: Hitesh Agarwal: Manan: Hitesh Agarwal: Manan: Hitesh Agarwal: Manan: Digvijay Dhabriya: Manan: Digvijay Dhabriya: ‘DHABRIYA Dhiabriva Polywood Limited GROUP November 14, 2024 Okay.
Answer, digvijay dhabriya
And the next question would be, sir, do we have any debt reduction plans? From a long term? Yes, itis there. In fact, we have not added new debts. We both threw our H1 figures. So there has been a reduction in both long-term and short-term debts. So we are focused on that.
Answer, digvijay dhabriya
We have a long-term vision of being debt free. But although, yes, we have not yet finalized any debt. But debt reduction plan is always there. Okay, okay, got it. And sir, where exactly is this depot, the showroom that you just said in Mumbai? Sorty? The showroom that you said that you have put another showroom in Mumbai.
Answer, digvijay dhabriya
Can you please tell me where exactly is it? Yes, this is in Andheri. The showroom is in Andheri. Lakshmi Industrial Complex. Where all the major interior products, showrooms are available there. So they are also placed over there. And that depot warehouse we have opened in the Bhiwandi.
Answer, digvijay dhabriya
Okay, got it. And the last question is, sir, can you please explain more about the new Soffitt product that you have mentioned? Like, give us a use case and what would be the EBITDAmargin profile for the same product? See, Socket Panel, again, since it is from the same extrusion segment, and currently the market is being controlled through imported products by two or three large players only. So we expect a little bit better margin in that, because the pricing, what's prevailing in the industry, they are taking some advantage, we can say, because that competition doesn't exist. So once the product goes into the competition, in the initial times, we will also have certain better margins in that product. But yes, it's not lesser than with our existing product portfolio.
Answer, digvijay dhabriya
Okay, so this would also be around 16% something? Yes. Okay, and sir, you didn't give me a use case of, see I don't know what exactly this product does. So can you explain what this product does? This product is basically a ceiling. You have seen the balconics. In the balconies, the upper side is the wooden ceiling, earlier it was.
Answer, digvijay dhabriya
Now we are putting all this Soffit for the balconies and all the parking spaces. And all those who are not open to the direct sunlight, but they are open spaces in the building. So the uses are increasing, and this product is going to take a big market. Okay, got it. And you said the market for this is around INR300 crores? Yes, right now. Page 10 of 13 & .
Answer, hitesh agarwal
Thank you so much. That's it. Thank you. The next follow-up question is from the line of Mahesh from Atal & Associates. Please go abead. Tharks for the follow-up, sir. Just wanted to know, how are we rewarding the people who are distributing our products?
Answer, hitesh agarwal
Because that's the main area where your products, yowll be able to cater it to the last customer. So how are we on that? How are we working on that? You're talking about the dealer distribution network and all, right? That s one thing. But at the end, the dealer and distributor would be also selling it through the interior designers and all those. One of the panel players, they have been very aggressive in this concept where they reward their last customer or the person who's buying from the dealer also.
Answer, hitesh agarwal
So how are we doing on that? Because at the end, it's all about the interior designers who will be recommending your product to the end customers? See, PVC profiles, which are basically used for the interior application, multiple interior applications, Wall Pancling, making the fumiture, doors, partitions and everything, which is distributed through our dealer distribution network and contributes around 55% - 60% of top line. So we are having a wide, large sales team which s spread throughout India. We are in regular touch with our dealer distributors, supporting them in all contexts, visiting to architects, interior designers. That is a regular activity, basically. Apart from that, we are regularly participating in exhibitions, shows.
Answer, hitesh agarwal
So that means we are catering to architects, interior designers, the large consumers like the builders and developers for their project requirements. So extending full support to our dealer distributors to generate the revenue at their end also. Okay. We've got just one more question from my side before I end this. So I just wanted to know that, let's say, could you also get into a zone where you apply for some government things, government projects and all directly? Where you revamp their buildings? Because there's a lot of revamp happening on the government side also?
Answer, hitesh agarwal
Yes, definitely. There is a good possibility of the business. And in fact, we have already started ealisting our new products, basically. Because earlier, we have done several projects with the governments, but not focused, not regularly focused in that. We have started enlisting our products, particularly for the fluted profiles and all. So going forward, maybe we'll have some revenue contribution from the government business, government side also. Just to squeeze in, sir, could you tell me how many players today are manufacturing this fluted panel and who's our next big competitors to us?
Answer, hitesh agarwal
The fluted panel is manufactured, several manufacturers have come up over, they are regionally spread basically. In the listed peers, there is no large player, because listed only we Page 11 of 13 s (REE & & . GROUP Digvijay Dhabriy: Mahesh: Moderator: Manan: Hitesh Agarwal: Manan: Hitesh Agarwal: Manan: Moderator: Arman: Digvijay Dhabriy: DHABRIYA Dhabriva Polywood Limited November 14, 2024 and one more industry is there from Gujarat, Kaka Industries.
Answer, digvijay dhabriya
Digvijay Dhabriya: Yes, thank you all participants in this evening phone call. I hope we have been able to answer your all questions satisfactorily. If you have any further questions or would like to know more about the company, please reach out to our Ivestors Relation Manager at X-B4 advisory. Thank you, stay safe and healthy. Jai Hind.
Questions about this call
- When was the Dhabriya Polywood Q2 FY25 earnings call transcript filed?
- Dhabriya Polywood filed the transcript with the exchange on 18 Nov 2024. This page is built from that transcript.
- What does this page list?
- 36 statements from the transcript across 8 topics, 22 of them with a figure. Each statement is shown with the transcript sentence it came from.
- Are the analysts' questions included?
- Yes. 1 question and management's answers are listed in the order they were asked, as the transcript prints them.
- Who wrote this page?
- DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.