Skip to content

Earnings call

Dhabriya Polywood Q4 FY26 earnings call: Dhabriya Polywood Limited had an order book of more than INR170 crores, providing revenue visibility, in financial year '26

By . Assembled by software from the company's transcript. Not reviewed by a person.

Transcript filed .

The company had an order book of more than INR170 crores, providing revenue visibility, in financial year '26. The company is targeting approximately 30% CAGR revenue growth over the long term while maintaining sustainable EBITDA and PAT margins, based on its current visibility. Board approved an INR100 crores strategic capital expenditure program to be deployed over financial year '26 to '28. The company delivered consolidated revenue of INR264 crores, up 12.5% year-on-year, in financial year '26. The company deployed approximately INR27 crores of capex in financial year 2026 for capacity enhancement and new line additions, including profile extrusion expansion, aluminum windows and facade division infrastructure, and automation of existing capacities.

The numbers management gave

Results

  • The company delivered consolidated revenue of INR264 crores, up 12.5% year-on-year, in financial year '26.
    Show source
    We delivered consolidated revenue of INR264 crores, representing growth of 12.5% year-on-year.
  • EBITDA grew by 45.6% and PAT grew by 67.2% in financial year '26.
    Show source
    More importantly, this growth translated into significantly stronger profitability, with EBITDA growing by 45.6% and PAT growing by 67.2%.
  • EBITDA margin rose from 16% to 20.6% and PAT margin rose from 7.7% to 11.4% in financial year '26, reflecting operating leverage, better product mix, manufacturing efficiencies and disciplined execution across businesses.
    Show source
    Our EBITDA margin expanded from 16% to 20.6%, while PAT margin improved from 7.7% to 11.4%, reflecting the strength of our operating leverages, better product mix, manufacturing efficiencies, and disciplin ed execution across businesses.
  • Q4 was its strongest quarter ever, with EBITDA margin above 21% and PAT growth of nearly 55% year-on-year.
    Show source
    Q4 was our strongest quarter ever, with EBITDA margin crossing 21% and PAT growth of nearly 55% year -on-year.
  • Core plastic product segment revenue grew by over 13% and segment profitability grew by 63% in financial year '26.
    Show source
    Dhabriya Polywood Limited May 27, 2026 Page 3 of 25 Our core plastic product segment continued to perform strongly, with revenue growth of over 13% and segment profitability growth of 63%.
  • Consolidated revenue from operations was INR264.48 crores in financial year 2026, versus INR235.11 crores in FY25, a growth of 12.5%.
    Show source
    For the financial year 2026, consolidated revenue from operations stood at INR264.48 crores versus INR235.11 crores in FY25, registering growth of 12.5%.
Show 20 more statements

Results

  • EBITDA increased by 45.6% to INR54.59 crores and its EBITDA margin improved by 460 basis points to 20.6% in financial year 2026.
    Show source
    EBITDA increased sharply by 45.6% to INR54.59 crores, while EBITDA margins improved by 460 basis points to 20.6%.
  • Profit before tax grew by 65.3% to INR40.67 crores, profit after tax increased by 67.2% to INR30.14 crores, and earnings per share was INR27.85 versus INR16.65 last year in financial year 2026.
    Show source
    Profit before tax grew by 65.3% to INR40.67 crores, and profit after tax increased by 67.2% to INR30.14 crore s. E arnings per share for the year stood at INR27.85 compared to INR16.65 last year.
  • PBT margin was around 9% for modular furniture and 16.6% for plastic extrusion and UPVC window in the last financial year.
    Show source
    So, on PBT level, you can say the modular furniture margins were somewhere around 9% and for the that plastic extrusion and UPVC window, it was 16.6%.
  • Fluted Panel revenue was INR54 crores in FY26.
    Show source
    Hitesh Agrawal: Yes, Fluted Panel FY26 it was INR54 crores.
  • Modular furniture division PBT margin in the last financial year was about 80% plus higher than in FY25.
    Show source
    In fact, our PBT margin they have gone up by about 80% plus as compared to the FY25.
  • PVC and uPVC revenue together was INR220 crores last year, including about INR60 crores from the uPVC window division and the remainder from the PVC Profile division.
    Show source
    Hitesh Agrawal: PVC and uPVC all together that revenue for the last year, it was INR220 crores.
  • The company used 66% of its capacity this year.
    Show source
    Hitesh Agrawal: See, our last year capacity utilization was for around 66% for PVC profile extrusion.
  • Top-line results fell short of its initial revenue targets, primarily because execution related to project supply for some large project orders was deferred.
    Show source
    This shortfall was primarily driven by deferred execution related to the project supply for some of the large project orders.
  • EBITDA margin for its UPVC polymer division was higher than for modular furniture as the company was gradually enhancing its modular line.
    Show source
    And so far, the margin is concerned, that EBITDA margi n for UPVC, this polymer division, that margins were a little higher as compared to the modular furniture because we are gradually enhancing our modular line also.
  • Modular furniture division revenue growth in the last two financial years was below expectations because the company was more cautious about profitability and margins.
    Show source
    So that's the reason that our revenue growth in last two financial year was not that too much, what we expected.
  • Finished-product prices last year were on about the same trajectory on average, except for the addition of indirect overhead costs.
    Show source
    So that prices of the finished product what we have sold in last year also, it was on an average about the same trajectory, you can say, except the indirect overhead cost addition.
  • April activities were not affected by the supply disruptions.
    Show source
    So, none of our activities going forward in April or the current month affected through these issues.
  • Debtors were at the same level, with no significant hike.
    Show source
    And regarding the debtors, it is in the same level, there is no much hike in that.
  • Debtors were proportionate to revenue growth.
    Show source
    Dhabriya Polywood Limited May 27, 2026 Page 25 of 25 It is in proportionate to the revenue growth only.
  • The company increased inventory after procuring substantial quantities of PVC resin and other polymers in March to maintain continuous operations.
    Show source
    And inventory, as I mentioned that we had done huge procurement, especially that PVC resin and other polymers in the March month itself, to maintain our operations continuously.

Money and capital

  • The company deployed approximately INR27 crores of capex in financial year 2026 for capacity enhancement and new line additions, including profile extrusion expansion, aluminum windows and facade division infrastructure, and automation of existing capacities.
    Show source
    Dhabriya Polywood Limited May 27, 2026 Page 4 of 25 On the balance sheet side, our net worth increased to INR129.60 crores.
  • INR100 crores capex will be funded partly by borrowings and mainly through internal accruals; the company generated around INR50 crores plus cash from operations in the last financial year, once depreciation is considered.
    Show source
    Hitesh Agrawal: See, partially it will be borrowed, but majorly it will be through internal accruals also considering the last financial year around INR50 crores plus cash generation was there from the operations itself once we had the depreciation .
  • Current debt-to-equity ratio is 0.56 and its borrowings will not reach 0.75.
    Show source
    Hitesh Agrawal: See, in the monetary terms I can't say you, but yes, that current level of our debt -to-equity ratio is 0.56.
  • Builders or developers provide Dhabriya Polywood Limited a mobilization advance normally equal to 10% to 20% of the total project order value.
    Show source
    So here it is through the mobilization advance, which is normally 10% to 20% of the total project that order value, that advance is provided by the builder or developers.
  • The company had more than INR7 crores of advances on a net basis on its current order booking.
    Show source
    Hitesh Agrawal: On current on the net basis, I think it is more than INR7 crores worth of advances we are having with us.

What it expects ahead

What management expects

  • The company is targeting approximately 30% CAGR revenue growth over the long term while maintaining sustainable EBITDA and PAT margins, based on its current visibility.
    Show source
    Based on our current visibility, we are targeting approximately 30% CAGR revenue growth over the long term while maintaining sustainable EBITDA and PAT margins.
  • The company said it could achieve more than INR450 crores of revenue from profile extrusion with its existing capacity.
    Show source
    But yes, with the existing capacity itself, we can surely achieve more than INR450 crores of revenue for the profile extrusion itself.
  • The company said revenue of more than INR450 crores from profile extrusion with existing capacity would require 85% overall capacity utilization.
    Show source
    Hitesh Agrawal: It will be with the 85% of the overall capacity utilization.
  • The company expects EBITDA margins of 20% plus to be comfortable, supported by its established product mix, customer response and order book across product verticals.
    Show source
    See, 20% plus EBITDA margins because see, the kind of the product mix which we have already established and the response that is coming, the order book what we are having for the different product verticals, so this sort of the margin is surely comfortable.
  • The company expects at least 2x from the INR100 crores capex once it is fully implemented by FY28, with more expected going forward.
    Show source
    Hitesh Agrawal: See, INR100 crores capex once it is implemented fully by FY28, so at least in the initial year 2x we are expecting.
  • Dhabriya Polywood Limited, currently at around 25%-26% return on equity and ROCE, projects similar levels for its new capex going forward.
    Show source
    And regarding this return on investment, surely that since we are currently Dhabriya Polywood Limited May 27, 2026 Page 14 of 25 sitting at around 25% -26% of return on equity and RO CE, so that sort of the levels we are projecting going forward for this new capex also.
Show 14 more statements

What management expects

  • The company expects its furniture division to achieve minimum growth of 20% to 25% going forward.
    Show source
    So going forward, furniture division also we are optimistic that it should also have 20% to 25% minimum growth.
  • The company expects its aluminum windows and facade division to contribute minimum INR40 crores to INR50 crores of revenue in FY27.
    Show source
    But in monetary terms in FY2 7, we are expecting minimum INR40 crores to INR50 crores of revenue contribution from this new division.
  • The company considers 20% EBITDA margin levels normal for both its uPVC windows or doors and aluminum windows and doors lines.
    Show source
    So we have kept the same kind of the pricing patterns and so 20% EBITDA margin levels are normal for both the line.
  • Fluted Panel division reached INR54 crores this year and expects to cross INR100 crores this year; INR100 crores to INR200 crores in the next two years is a target.
    Show source
    Definitely it is in Dhabriya Polywood Limited May 27, 2026 Page 18 of 25 our target because we have already reached INR54 crores this year.
  • The company projects INR55 crores to INR60 crores of revenue addition in FY27 from new capacity for WPC doors and WPC profiles in the extrusion-related vertical and the Aluminum Windows and Facade division.
    Show source
    So far as the revenue generation from this new capex is concerned, this current FY27, we are projecting somewhere around INR55 crores to INR60 crores revenue addition.
  • The company has commissioned the WPC door machines and trial runs are under process; it is going to commercially launch WPC doors from the next quarter and expects INR15 crores of revenue contribution from the new WPC door this year.
    Show source
    So, this year, we are expecting somewhere around INR15 crores revenue contribution from this new WPC door.
  • The company expects its working capital cycle across debtors, inventory and payables to return to previous levels.
    Show source
    So going forward, that again that this working capital cycle for all these three factors will be on the previous levels.

Orders

  • The company had an order book of more than INR170 crores, providing revenue visibility, in financial year '26.
    Show source
    However, our performance this quarter reflects stability, anchored by a strong, high-quality order book of more than INR170 crores, which gives us excellent revenue visibility.
  • The company had closed orders worth INR50 crores plus for its new aluminum window and glazing project vertical.
    Show source
    We have already closed the orders worth INR50 crores plus for this new project vertical.
  • Order book stood at INR174 crores, the highest in its history.
    Show source
    As of now, our order book has is standing at INR174 crores, which is the highest order book in our history.
  • The company had received INR56 crores of orders for its new aluminium windows and facade line of business.
    Show source
    Aluminium windows and facade division, since it is a very, very big market in India, and since we are already connected with the large builders and developers, so we have an edge to serve them in that particular line of business, and that's the reason we have alr eady received, in fact, INR56 crores of orders related to this new line of business.
  • Current order backlog for project-related business was INR174 crores.
    Show source
    Hitesh Agrawal: No, that order backlog is current order backlog is INR174 crores for the project-related business.
  • Order book was in the range of INR120 crores-INR140 crores last year; its current order book is approximately INR84 crores for uPVC windows and doors, INR34 crores for the Modular Furniture division and INR56 crores for aluminum windows and facade, totaling INR174 crores, to be fully executed in the next 18 to 24 months.
    Show source
    So, all together INR174 Dhabriya Polywood Limited May 27, 2026 Page 23 of 25 crores.
  • The company exported a large number of furniture items to Europe last year and has ample orders from Europe this year, although prices are under pressure and demand is present.
    Show source
    Last year we have exported a big number of furniture to Europe, and this year we are having an ample order s from Europe.

What it is building and selling

Projects and capacity

  • Board approved an INR100 crores strategic capital expenditure program to be deployed over financial year '26 to '28.
    Show source
    The Board has approved INR100 crores strategic capital expenditure program to be deployed over financial year ' 26 to '28.
  • The company deployed approximately INR27 crores of capex in financial year '26 toward expansion of PVC and WPC profile extrusion lines, dedicated manufacturing infrastructure for the aluminum glazing and window division, and modernization and automation of existing lines.
    Show source
    During financial year ' 26, we have already deployed approximately INR27 crores of capex towards expansion of PVC and WPC profile extrusion lines, building dedicated manufacturing infrastructure for the aluminum glazing and window division, and modernizing and automating our existing lines.
  • Remaining strategic capital expenditure deployment over financial year '27 and '28 will strengthen its manufacturing footprint and enable it to scale into new categories.
    Show source
    The remaining deployment over financial year ' 27 and '28 will further strengthen our manufacturing footprint and enable us to scale into new categories.
  • The company increased PVC profile extrusion capacity by 3,600 metric tons during the last financial year, from 24,000 per annum to 27,600 metric tons.
    Show source
    Earlier our capacity was 24,000 per annum, now it stood at 27,600 metric tons.
  • The company added a WPC door extrusion product line and spent approximately INR10 crores of capex on it in the last financial year; some remaining capex is planned for the current financial year.
    Show source
    So, in that also we have done approximately INR10 crores capex in last financial year, and some of the remaining capex is going to happen in current finan cial year.
  • The company had undertaken around INR27 crores of capex in the last financial year; its Bangalore aluminum window division was already implemented, and its WPC door vertical was due to be implemented in the coming quarter.
    Show source
    Hitesh Agrawal: Yes, see, the capex what we have undertaken basically that around INR27 crores is already happened in last financial year, out of which one of our product line is already implemented, that Bangalore aluminum window division, and then WPC door vertical is also going to get implemented in the coming quarter.
Show 13 more statements

Projects and capacity

  • The company projects around INR35 crores to INR40 crores of capex this financial year for its Jaipur aluminum windows and doors facility and WPC wall and ceiling division, as well as modernization and upgrading of existing lines with high-output extrusion facilities.
    Show source
    So, this financial year also we are projecting around INR35 crores to INR40 crores of capex for this Jaipur facility of aluminum windows and doors and WPC wall and ceiling division, and apart from that, modernization and upgrading our existing lines by high -output extrusion facilities.
  • The company expects INR20 crores to INR30 crores of capex next financial year for projects that will take more time.
    Show source
    So, and in next financial year also for the some of the projects which are going to take little bit more time, so maybe INR20 crores to INR30 crores will take.
  • The company has planned INR100 crores of capex altogether.
    Show source
    So, all together INR100 crores of capex is planned.

Demand and pricing

  • The company said its underlying demand remained robust and the deferred project execution was a matter of timing, not a loss of business.
    Show source
    Importantly, this is a matter of timing, not a loss of business, as our underlying demand remains robust.
  • After the West Asia crisis, Dhabriya Polywood Limited revised its price list three times to account for raw-material price hikes.
    Show source
    So, in fact, after this West Asia crisis, we have already revised our price list three times considering the price hikes of all the raw materials and all.
  • The company said WPC doors and WPC wall and ceiling panel had no direct competition as of the call.
    Show source
    Hitesh Agrawal: See, the WPC doors, WPC wall and ceiling panel, definitely there is no direct competition as of now.

Segments

  • The company is adding WPC doors, WPC wall and ceiling panels, and aluminum windows, doors, and glazing systems as new verticals.
    Show source
    We are excited about the addition of new verticals, including WPC doors, WPC wall and ceiling panels, and aluminum windows, doors, and glazing systems.
  • Aluminum window and glazing division, under the leadership of Mr. Varghese, had begun seeing market traction and project inquiries.
    Show source
    The aluminum window and glazing division under the leadership of Mr. Varghese has already started seeing strong market traction and project inquiries.
  • The company sells its polymer-related products under the Polywood brand, including PVC profile B2B products, uPVC windows and doors, WPC doors, and aluminium windows and doors.
    Show source
    So all the polymer-related products come from the Polywood umbrella only, whether it is PVC profile B2B business line or the uPVC windows and doors, even the newly added solutions that WPC doors and aluminium windows and doors, everything is from Polywood only.
  • Modular furniture brand Dynasty covers products made from MDF, particle board, HDHMR and sometimes ply; the company describes modular furniture as an agriculture-based board manufacturing business, not polymer-based.
    Show source
    But modular furniture is not a polymer-based product, it's an agriculture-based board manufacturing basically, that is the MDF, particle, HDHMR, or the sometimes it is ply also.
  • The company uses Dynasty for project and B2B business, while Studio Arezzo provides interior designers, architects and large clients an end-to-end solution from design to implementation.
    Show source
    So Dynasty is a brand which we serve for the projects, B2B and all, and Studio Arezzo, it's an end -to-end solution where we are interacting with the interior designer, architects, that large clients, and providing them end -to-end solution from design to implementation.
  • D-Stona brand covers stone-plastic-composite products, including sheets and mouldings rather than hollow profiles.
    Show source
    As you say that SPC, WPC kind of products, so it is a stone plastic composite D-Stona, where we make the different line of product, that is the sheets and mo uldings, that is not the hollow profile.

Deals and partners

  • The company has added three-four new brands, including Godrej, Smart Homes and M3M, to its modular furniture division, alongside existing clients DLF, Adani and Mahindra.
    Show source
    So, in that race, we have already added three-four new brands like Godrej, then this Smart Homes and all M3M, apart from our existing clientele of DLF, Adani, and Mahindra.

Risks, rules and outside factors

Outside factors

  • Fixed-price contracts account for around 30% of Dhabriya Polywood Limited's revenue, while more than 60% of revenue comes from PVC profile distribution, where prices are revised based on cost or prevailing factors.
    Show source
    More than 60% revenue comes from that vertical, where we do revise the prices as ba sed on the cost or the prevailing factors.
  • Key raw materials include PVC resins, pigments and additives, and raw material costs increased around 15% to 18% as a whole; individual commodity prices had increased in the range of 15% to 40%.
    Show source
    So as a whole, if we concentrate on our line of business, we can say around 15% to 18% cost of raw material has already increased.
  • PVC resin, Dhabriya Polywood Limited’s key raw material, moved in the range of INR68 to INR85 last year.
    Show source
    If we see the pricing trend of the PVC resin, which is the key raw material, last year it was moving in the range of the INR68 to INR85.
  • When PVC resin prices stay in the INR80-INR85 range for a longer period, finished-product prices are higher; when PVC resin falls below INR70, market demand and competition can lead to price reductions.
    Show source
    Once it comes down to below INR70, so market demands, then even the sometime competition also start reducing the prices.
  • The company said price-escalation clauses normally do not exist for door, window and modular furniture project revenue, but regular procurement and volumes help minimize the risk.
    Show source
    But we considering our volumes, our regular procurement, so we do minimize such kind of risk.
  • The company made substantial procurement of commodities subject to price increases in the March quarter, leaving year-end inventories somewhat higher than the regular range.
    Show source
    That's the reason our inventories at the end of the year is bit higher as compared to the regular range.
Show 1 more statement

Outside factors

  • The company paid all its suppliers in the last two months of the financial year to secure better pricing and continuous supply amid the Middle East war crisis and supply-chain disruption, and had ample inventory of raw materials as a result.
    Show source
    This activity was done in the last two months of the financial year, where we have paid off all our suppliers in single sort looking at the that Middle East crisis, war crisis, that disruption in the supply chain and all those things.

What the company said on its earnings call, taken from its own transcript. Not advice.

Questions and answers

  1. Question

    Harshit Khatka: Yes, sir. Sir, the INR264 crores of revenue that we have clocked, just wanted to understand, like, can you give the segmental breakup of it? Like how much has come from PVC, UPVC, and modular? And I'll be glad if you can also give the EBITDA margin breakup of them.

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, thank you, Mr. Harshit. See, that INR27 crores capex which we did in last financial year, it was basically related to the upgradation of our existing capacities where the PVC profile extrusion capacity is increased by 3,600 metric tons. Earlier our capacity was 24,000 per annum, now it stood at 27,600 metric tons. Apart from that, WPC door extrusion, which we announced earlier also, we have added new product line. So, in that also we have done approximately INR10 crores capex in last financial year, and some of the remaining capex is going to happen in current finan cial year. Apart from that, for our Bangalore aluminum windows and facade division, we have made the capex. So, all together, we have done the capex in WPC door, PVC profile extrusion, as well as in the for the aluminum windows and facade division.

  2. Question

    Harshit Khatka: Sir, actually I was looking for the revenue breakup of the products that you have, the PVC, UPVC, and modular, and the margin breakup of them. Dhabriya Polywood Limited May 27, 2026 Page 5 of 25 Hitesh Agrawal: Yes, see, current breakup of the last financial year's revenue, say approximately 84% revenue came from our polymer -based product PVC and UPVC, and 16% around INR43 crores came from the modular furniture.

    Answer, hitesh agrawal

    And so far, the margin is concerned, that EBITDA margi n for UPVC, this polymer division, that margins were a little higher as compared to the modular furniture because we are gradually enhancing our modular line also. So once that operational efficiency level is increased, so both will be on at par. So, on PBT level, you can say the modular furniture margins were somewhere around 9% and for the that plastic extrusion and UPVC window, it was 16.6%.

  3. Question

    Harshit Khatka: All right, understood. And sir, the capacity that we have right now, 27,600, right? What is the peak revenue that we are expecting from this capacity? And what is the timeline that we are expecting, that at in what year will we be able to achieve the peak revenue?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, our last year capacity utilization was for around 66% for PVC profile extrusion. Maximum with the capacity considering the end numbers of SKUs, 80% is the benchmark. But when we go for the addition of the new profiles or the new product lines, we need to increase the lines also. So that capacity enhancement is a continuous activity which keeps on. But yes, with the existing capacity itself, we can surely achieve more than INR450 crores of revenue for the profile extrusion itself.

  4. Question

    Harshit Khatka: And that would be on what capacity utilization?

    Answer, hitesh agrawal

    Hitesh Agrawal: It will be with the 85% of the overall capacity utilization.

  5. Question

    Harshit Khatka: Right. So sir, the 30% of growth that you have, you know, guided, so the INR450 crores of revenue would, you know, should come in FY28. So, are we looking at INR450 crores of top - line in FY28 itself?

    Answer, hitesh agrawal

    Hitesh Agrawal: No, see, we have added multiple product verticals basically. If you see that we are diversifying our activities by adding the new lines, that WPC doors, WPC wall and ceiling panels, and majorly the aluminum windows and facade division, wherein we have already, as Chairman sir mentioned, that more than INR50 crores worth of orders are already closed in last two quarters, and the execution is happening now in the current fiscal. So that revenue will be this enhanced expected revenue growth will be contributed by all verticals, existing as well as the new verticals.

  6. Question

    Harshit Khatka: Right, understood. And the consolidated EBITDA that we have of 20% right now, so would this sustain or how do you see the margins going forward for '27 and '28 at least?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, last two years we have put lot of efforts in freezing our product mix basically, the better product mix. In fact, we have upgraded our offerings to cater the upper -middle and high-class clientele, so where we have the better margins. And last four qu arters, our margins have been regularly improving, and we are quite confident that 20% plus EBITDA margin is sustainable in longer run also.

  7. Question

    Vishvender Singh: Yes, hi sir. Am I audible?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, see, that growth was not up to our expectations primarily due to the supplies were deferred for couple of the projects, large projects, especially in the Maharashtra and one or two projects in Delhi NCR also from the buyer side basically. We were having the healthy order book, but somehow the stage where our products are to be supplied, especially the UPVC windows and doors, that stage was deferred. So that was the primary cause. There was no other specific reason behind this.

  8. Question

    Vishvender Singh: So what other steps are we taking to minimize such risks going ahead in FY27 and '28?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, that we are widening our reach to multiple builders and developers. As of now, our order book has is standing at INR174 crores, which is the highest order book in our history. So number of regular projects are increasing basically. So, to overcome th is issue, we are focusing adding more and more new sites, new builders.

  9. Question

    Vishvender Singh: Got it. Just last question on the price escalation cost. You mentioned that most of your contracts are fixed price. So being the West Asia crisis, most of the raw materials prices have increased. So how are you planning to sustain the margins that we have achieved?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, this fixed price contracts basically links to our around 30% of revenue because our major chunk of revenue comes from our B2B business basis PVC profile distribution. More than 60% revenue comes from that vertical, where we do revise the prices as ba sed on the cost or the prevailing factors. So, in fact, after this West Asia crisis, we have already revised our price list three times considering the price hikes of all the raw materials and all. Yes, for the door, windows, and the modular furniture project revenue, that price escalation clause does n't exist normally. But we considering our volumes, our regular procurement, so we do minimize such kind of risk. In fact, in March quarter, we have done a lot of procurements towards such commodities where this price increase does take place. That's the reason our inventories at the end of the year is bit higher as compared to the regular range.

  10. Question

    And sir, now the last year there was a huge jump in the margin from roughly 16 % to 21%. So now due to the Iran war, the raw material prices have jumped up a lot, the petrochem. So firstly, what is our starting raw material and how much has it gone up by? And how much price hike have we taken recently and how much do we plan to take going forward?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, Keshavji. See, that price hike in the is directly related to the products which are coming from the crude oil. All those products are our key raw materials, the PVC resins and all other pigments and additives. Apart from that, that products which require s high energy, especially that aluminum and other things. So , prices has gone up heavily. We all know that you can say in the range of the 15% to 40% price hike has already happened depending on the different commodity pricing. So as a whole, if we concentrate on our line of business, we can say around 15% to 18% cost of raw material has already increased.

Show 28 more questions
  1. Question

    Keshav Garg: So, the bottom line is that 21% EBITDA margin, all-time high EBITDA margin, we can maintain going forward and in FY27 including FY27?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, yes. See, 20% plus EBITDA margins because see, the kind of the product mix which we have already established and the response that is coming, the order book what we are having for the different product verticals, so this sort of the margin is surely comfortable.

  2. Question

    Keshav Garg: Now sir, my last question is sir that since we have 100% subsidiaries, why not merge them and make a stand-alone entity and save on compliance cost and the complexity? And sir, also what is the wisdom of having four brands when the customer is by and large the same and the product is also basically PVC based? Then sir, why should we not have one brand so that w e can really push that brand rather than divide our marketing budget into four brands?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, here I'll just focus on the brand first. See, our main key brand is the Polywood. So all the polymer-related products come from the Polywood umbrella only, whether it is PVC profile B2B business line or the uPVC windows and doors, even the newly added solutions that WPC doors and aluminium windows and doors, everything is from Polywood only. Dhabriya Polywood Limited May 27, 2026 Page 9 of 25 See, the other brand, that is a diversified product, that is a different product, that is a Dynasty. Because see, polymer as it resemble from its wording also, it has some polymer. But modular furniture is not a polymer-based product, it's an agriculture-based board manufacturing basically, that is the MDF, particle, HDHMR, or the sometimes it is ply also. So that is altogether a different.

    Answer, hitesh agrawal

    So Polywood brand doesn't go with that line of business. So where we are having Dynasty and Studio Arezzo. So Dynasty is a brand which we serve for the projects, B2B and all, and Studio Arezzo, it's an end -to-end solution where we are interacting with the interior designer, architects, that large clients, and providing them end -to-end solution from design to implementation. So these are the brand. And the fourth brand, D-Stona, as the name resembles, Stona means it's a stone substitute. As you say that SPC, WPC kind of products, so it is a stone plastic composite D-Stona, where we make the different line of product, that is the sheets and mo uldings, that is not the hollow profile. So that's the reason to diversify, to bifurcate the product, to connect the client directly with the feature of the product when we speak about the brand.

  3. Question

    Mahesh Atal: Sir, what was the Fluted Panel number in the last year financials?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, Fluted Panel FY26 it was INR54 crores.

  4. Question

    Mahesh Atal: And if we see the margin profile, sir, so the new capex that you are doing, the incremental capex, is it going to higher margin thing or lower? Because this windows, whatever you are talking about, according to your workings, is it a higher margin thing or a lower margin product?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, INR100 crores capex once it is implemented fully by FY28, so at least in the initial year 2x we are expecting. Going forward, definitely it would be more.

  5. Question

    Mahesh Atal: And what's the competitive intensity in that particular product?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, the WPC doors, WPC wall and ceiling panel, definitely there is no direct competition as of now. Aluminium windows and facade division, since it is a very, very big market in India, and since we are already connected with the large builders and developers, so we have an edge to serve them in that particular line of business, and that's the reason we have alr eady received, in fact, INR56 crores of orders related to this new line of business. So based on our past service experience, we'll get what we are expecting.

  6. Question

    Mahesh Atal: Q2. And then what would be the revenue that you are expecting out of the INR56 crores order backlog in this financial year?

    Answer, hitesh agrawal

    Hitesh Agrawal: No, that order backlog is current order backlog is INR174 crores for the project-related business.

  7. Question

    Deepak Verma: Okay, understood. I asked this question because last year some one of the calls I asked the same question about, you know, some financial sluggishness and you had told me that it was because real estate was not really going well? Fine, that question is answered. Your outlook is positive, I understand. But the on the other question on capex, I just wanted to understand the current and planned both and with ROIC, return on invested capital, that you expect and the figures in terms of crores?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, see, the capex what we have undertaken basically that around INR27 crores is already happened in last financial year, out of which one of our product line is already implemented, that Bangalore aluminum window division, and then WPC door vertical is also going to get implemented in the coming quarter. So, this financial year also we are projecting around INR35 crores to INR40 crores of capex for this Jaipur facility of aluminum windows and doors and WPC wall and ceiling division, and apart from that, modernization and upgrading our existing lines by high -output extrusion facilities. So, and in next financial year also for the some of the projects which are going to take little bit more time, so maybe INR20 crores to INR30 crores will take. So, all together INR100 crores of capex is planned. And regarding this return on investment, surely that since we are currently Dhabriya Polywood Limited May 27, 2026 Page 14 of 25 sitting at around 25% -26% of return on equity and RO CE, so that sort of the levels we are projecting going forward for this new capex also.

  8. Question

    Runit Kapoor: So, my question is you are anticipating 30% revenue growth for FY27. So, since the realizations also would have jumped up because you have passed it on to the customers, so I wanted to understand how much volume growth are you expecting for FY27 category-wise?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, that PVC profile extrusion category, we are last year also about from the level of the 50% of capacity utilization we reached to the 66%. So similarly, maybe around 20% of growth in our regular extrusion line B2B business we are expecting, apart from the new product verticals basically, which will be contributing bit more. So, considering all those factors when this we have projected for the 30% CAGR growth going forward.

  9. Question

    Runit Kapoor: No, I'm asking specifically about the volume growth, like how much volumes would grow and how much, like, price would grow in terms of that?

    Answer, hitesh agrawal

    So, from the volume side, 20% we are optimistic that minimum 20 % growth will be there.

  10. Question

    Runit Kapoor: No, I was saying that in the near term they are planning to implement it on furniture also. So, I'd say what is your growth outlook are you looking in that division, like?

    Answer, hitesh agrawal

    We are negotiating lot of inquiries for modular high -volume project business also. So going forward, furniture division also we are optimistic that it should also have 20% to 25% minimum growth. Management: We have added Arezzo Studio concept, which will serve the small customers in coming time and give them the furniture fastest available in a fastest mode. So, this way they can save their time. So, this is what our plan is.

  11. Question

    Runit Kapoor: Yes, okay. And my last question is regarding your capex of INR100 crores. So, how do you see the borrowings planning out, like, because your borrowings also increased drastically because I think because of working capital issues? But how do you see it panning out, like, how out of INR100 crores how much will be from borrowings?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, partially it will be borrowed, but majorly it will be through internal accruals also considering the last financial year around INR50 crores plus cash generation was there from the operations itself once we had the depreciation . So little bit borrowings will definitely be there so that we can do the implementation of the project as per the timelines only.

  12. Question

    Runit Kapoor: But what would be the peak levels of borrowings? Can you just quantify that?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, in the monetary terms I can't say you, but yes, that current level of our debt -to-equity ratio is 0.56. So, it definitely it will not reach 0.75.

  13. Question

    Madhur Rathi: Sir, thank you for the opportunity. Sir, I wanted to understand regarding this aluminum windows and facade division. Sir, what is our capacity and with the Jaipur facility that we are Dhabriya Polywood Limited May 27, 2026 Page 16 of 25 commissioning, what would be the revenue potential for this division going forward? And sir, what kind of revenue can we expect from this division for FY27?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, as such there is no defined capacity when we are working on any custom -made solutions. Basically, it is more of fabrication sort of things. We have to design and fabricate the product as per the customer size and designs. But in monetary terms in FY2 7, we are expecting minimum INR40 crores to INR50 crores of revenue contribution from this new division.

  14. Question

    Madhur Rathi: And sir, what was the revenue in FY26? And sir, can we expect a 20% to 25% margin on this product?

    Answer, hitesh agrawal

    Hitesh Agrawal: It's on the same line of business basically that when we talk about the uPVC windows or doors or whether it is a aluminum windows and doors, the expenditure heads are similar basically. So we have kept the same kind of the pricing patterns and so 20% EBITDA margin levels are normal for both the line.

  15. Question

    Madhur Rathi: Got it. Sir, also, if I were to come to our modular furniture division, sir, last year we did a revenue of INR40 crores and this year we did a revenue of INR43 crores. Sir, we were very optimistic about this division. So, sir, where is where are we lacking in terms of growth for this division, if you could help us understand? Dhabriya Polywood Limited May 27, 2026 Page 17 of 25 Hitesh Agrawal: Again, basically that what we did in our PVC Profile division also last two years, we have we have been more cautious about the that profitability front, that margin front.

    Answer, hitesh agrawal

    So that's the reason that our revenue growth in last two financial year was not that too much, what we expected. So since, if you see that last financial year Modular Furniture division, that our profitability has improved a lot. In fact, our PBT margin they have gone up by about 80% plus as compared to the FY25. So different product mix again, that also exist in Modular Furniture division. Now that everything is as already implemented, now more focus is on getting new larger orders and executions. So, in that race, we have already added three-four new brands like Godrej, then this Smart Homes and all M3M, apart from our existing clientele of DLF, Adani, and Mahindra. So, we are approaching the new builders and getting good response.

  16. Question

    Madhur Rathi: Got it. And sir, the Fluted Panel division, sir, can this reach INR100 crores levels in the next two years? And sir, do we also -- so what products of the Fluted Panel are manufactured in -house versus bought out for this product?

    Answer, hitesh agrawal

    Hitesh Agrawal: So, nothing is bought out for us. We are a 100% manufacturing company. If you see our financials, that our stock-in-trade purchase is negligible. So, it's 100% manufacturing only. And expecting the level of the INR100 crores to INR200 crores in next two years . Definitely it is in Dhabriya Polywood Limited May 27, 2026 Page 18 of 25 our target because we have already reached INR54 crores this year. So, we will cross INR100 crores this year also.

  17. Question

    Harshit Khadka: Thank you for taking my question again. Sir, I just wanted to understand the revenue split of only PVC and uPVC for this year FY26?

    Answer, hitesh agrawal

    Hitesh Agrawal: PVC and uPVC all together that revenue for the last year, it was INR220 crores. Out of that, about INR60 crores was from the uPVC window division and remaining from the PVC Profile division.

  18. Question

    Harshit Khadka: All right, sir, understood. And sir, you said that the current capacity at 85% utilization can do INR450 crores of top -line revenue, right? So, I just wanted to understand the INR27 crores of capex that you have done in FY26 and the INR30 crores -INR40 crores of capex that we are going to do in FY27. So, what quantum of capacity we are putting and what kind of revenues can we see in FY27 itself? Because INR27 crores is already done, right? So FY27, FY28, I mean the new capacity I just want to understand the revenue from new capacity only?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, this new capacity what we are adding, it is for the different product verticals. One is for the extrusion-related WPC doors and WPC profiles, and then second one is the Aluminum Windows and Facade division. So far as the revenue generation from this new capex is concerned, this current FY27, we are projecting somewhere around INR55 crores to INR60 crores revenue addition. Dhabriya Polywood Limited May 27, 2026 Page 19 of 25 Harshit Khadka: Right, understood.

  19. Question

    Aditya Jain: Thanks for the opportunity, sir. Congratulations on a good set of numbers. My first question is that, you've mentioned in the call that, INR174 crores is our current order book. Can you provide the split, and also what was this order book last year? And what are the execution timelines for this order book?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, last year that order book was in the range of INR120 crores-INR140 crores. So, the current order book is the highest order book what we are having. So, the breakup of this order book is basically that three products vertical. One is the uPVC windows a nd doors, which is approximately INR84 crores of order book. INR34 crores is related to the Modular Furniture division, and the remaining that INR56 crores, it's for our newly added division of aluminum windows and facade. So, all together INR174 Dhabriya Polywood Limited May 27, 2026 Page 23 of 25 crores. This execution timeline for all these products depending on the different, but definitely that 100% of this one will be executed in the next 18 to 24 months.

  20. Question

    Aditya Jain: WPC door, yes.

    Answer, hitesh agrawal

    Hitesh Agrawal: We have already commissioned the machines and all, trial runs are under process. So, from the next quarter, we are going to commercially launch it. So, this year, we are expecting somewhere around INR15 crores revenue contribution from this new WPC door.

  21. Question

    Aditya Jain: Yes, I am online. Just wanted to know what kind of revenue will we be generating from WPC doors this year.

    Answer, hitesh agrawal

    Hitesh Agrawal: INR15 crores, 1-5 crores, because see, next quarter we are going to launch it commercially, so effectively we will be having the revenue contribution for the H2 only.

  22. Question

    Aditya Jain: One question that was asked was that, you know, what kind of volume growth are we looking at this year? My question is little is pretty much what kind of volume growth we had last year because we had around 13%-14% sales growth. So, what was the volume growth?

    Answer, hitesh agrawal

    Hitesh Agrawal: See, last year also, it was somewhere around 20% growth in the extrusion division.

  23. Question

    Aditya Jain: Yes, so you said, 15%-20% volume growth last year as well?

    Answer, hitesh agrawal

    Hitesh Agrawal: Last year also, ye s. So, this year also, so we are that that is a minimum 20% growth , we are projecting for the current financial year, and then further revenue contribution will be from the newly added product verticals.

  24. Question

    Aditya Jain: No, my question is, what you are saying is that our volume growth was in line with absolutely in line with or revenue growth. So, there was no pricing -related growth last year. Is that what you are saying, sir? Dhabriya Polywood Limited May 27, 2026 Page 24 of 25 Hitesh Agrawal: See, pricing-related growth see, as such in our line of business, that's varying because it prices doesn't go one-sided.

    Answer, hitesh agrawal

    So, some couple of times, we have to reduce the price also when the raw material prices goes down. If we see the pricing trend of the PVC resin, which is the key raw material, last year it was moving in the range of the INR68 to INR85. So, when the material is in the range of INR80-INR85 for the longer period, the prices are higher. Once it comes down to below INR70, so market demands, then even the sometime competition also start reducing the prices. So, we have to we also have to reduce. So that prices of the finished product what we have sold in last year also, it was on an average about the same trajectory, you can say, except the indirect overhead cost addition.

  25. Question

    Aditya Jain: One question that I have is, on this order book, and I would assume that for a lot of projects we would make custom panels, doors, windows, whatever we do, or profiles. Do we take significant advances from the customers, and the if it is so, can you give an idea of what kind of advances do we have from customers?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, it is again it is a market practice basically, when we are closing any price for a longer range -- longer period. So, from the buyer side also there has to be some commitment. So here it is through the mobilization advance, which is normally 10% to 20% of the total project that order value, that advance is provided by the builder or developers.

  26. Question

    Aditya Jain: So, what are the current , because last year I remember in our annual report, our advances was around INR5 crores. So, what kind of advances do we have today on the current order booking?

    Answer, hitesh agrawal

    Hitesh Agrawal: On current on the net basis, I think it is more than INR7 crores worth of advances we are having with us.

  27. Question

    Aditya Jain: Okay. Last question, sir, on the working capital side. What has happened is that , and that has also kind of impacted our debt metrics is that our receivables have gone up, our inventory levels have gone up, and our payables are almost zero. Do you see these -- any reasons for the same because last year at least we had around INR10 crores of payables?

    Answer, hitesh agrawal

    Hitesh Agrawal: Yes, see, it was a strategic decision taken by the management to have the benefit of the pricing, that better pricing, and at the same time the continuous supply. This activity was done in the last two months of the financial year, where we have paid off all our suppliers in single sort looking at the that Middle East crisis, war crisis, that disruption in the supply chain and all those things. So that was a call we took and we got benefited from that. We had got the ample inventory for all our raw materials, whereas , we have come to know that supplies are totally disturbed. So, none of our activities going forward in April or the current month affected through these issues. So, that was the one reason that we have knowingly paid all our vendors. And regarding the debtors, it is in the same level, there is no much hike in that.

    Answer, hitesh agrawal

    Dhabriya Polywood Limited May 27, 2026 Page 25 of 25 It is in proportionate to the revenue growth only. And inventory, as I mentioned that we had done huge procurement, especially that PVC resin and other polymers in the March month itself, to maintain our operations continuously. So that's the reason inventories were increased. So going forward, that again that this working capital cycle for all these three factors will be on the previous levels.

  28. Question

    Aditya Jain: Okay, great, sir. Thank you and all the best.

    Answer, digvijay dhabriya

    Digvijay Dhabriya: Yes. So, thank you for all the question and answer. We have presented all the -- I hope that we have answered all your questions properly. And I welcome everyone to please do visit our facilities, and see our project closely , and what we are doing , and what are the new areas in which we are concentrating our production facilities and design facilities. So, what we are doing for the exports also, they are a remarkable achievement at our Dynasty manufacturing facility. Last year we have exported a big number of furniture to Europe, and this year we are having an ample order s from Europe. Although the prices are under pressure, but demand is there.

Questions about this call

When was the Dhabriya Polywood Q4 FY26 earnings call transcript filed?
Dhabriya Polywood filed the transcript with the exchange on 30 May 2026. This page is built from that transcript.
What does this page list?
72 statements from the transcript across 9 topics, 29 of them with a figure. Each statement is shown with the transcript sentence it came from.
Are the analysts' questions included?
Yes. 38 questions and management's answers are listed in the order they were asked, as the transcript prints them.
Who wrote this page?
DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.
Research and analysis only, not investment advice. Every statement on this page is the company's own, taken from its transcript; DalalOS adds no view on it and is not a SEBI-registered investment adviser. Something wrong? Report an error.
Dhabriya Polywood Q4 FY26 concall: Dhabriya Polywood Limited had an order book of more than INR170 crores, providing revenue visibility, in financial year '26 · DalalOS