Earnings call
Dhabriya Polywood Q2 FY27 earnings call: Dhabriya Polywood Limited projects business growth of 25% to 30% going forward on a yearly basis in the long term
By DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person.
Transcript filed .
The company projects business growth of 25% to 30% going forward on a yearly basis in the long term. The company has taken up a capacity expansion plan for its extrusion division, initially targeting another 8,000 metric ton of capacity in the next 3 to 6 months; machine orderings have already been taken up. Margins improved by 70 basis points in H1 compared with the previous year. Competition from Chinese imports of profiles for ceiling paneling and doors has almost vanished in the last 2 to 3 years, as domestic manufacturing capacity has built up; Dhabriya Polywood said its 34 years in the business, wide range of offerings and ongoing R&D for new solutions helped it achieve better revenue growth with sustained margins. Retention applies to Dhabriya Polywood Limited's project-related uPVC, window, door products and Modular Furniture business; around 5% is withheld from each running bill and becomes payable on project completion plus the defect liability period.
The numbers management gave
Results
- Margins improved by 70 basis points in H1 compared with the previous year.
Show source
So as compared to the previous year also, that we have been able to have some improvement in H1 also by 70 basis points.
- As a new segment, Dhabriya Polywood Limited's initial margins in aluminum and facade may be slightly lower by 2% to 3% compared to its overall margin.
Show source
So this being the new segment, initial margins may be slightly lower 2%, 3% as compared to our overall margin.
- Trade receivables include retention money of around INR8 crores to INR10 crores, relating to different longer periods, including six months, one year or more than one year for larger projects.
Show source
Our trade receivables includes the retention money component also, which is in the range of around INR8 crores to INR10 crores of overall, which belongs to different longer periods, so maybe 6 months, 1 year or in some cases more than 1 year where the project is of the bigger side.
- The regular debtor cycle of Dhabriya Polywood Limited's three verticals is 30 to 45 days.
Show source
But the regular debtor cycle of our -- all 3 verticals is in the range of 30 to 45 days only.
- Extrusion business has a better EBITDA margin than its other lines of business, with margins across different product segments on the same line, varying by 2% to 3% plus or minus.
Show source
But as you mentioned, that EBITDA margin for different product segment, it's on the same line, with the 2% or 3% plus/minus, wherein the extrusion is having the better margin as compared to the other line of business.
- The company reported INR16 crores of Modular Furniture revenue in H1, compared with around INR23 crores in H1 last year, due to delays in project-related executions; deliveries started from the last month, and the company expects to clear the backlog in this 6 months.
Show source
And against that, yes, we have done INR16 crores.
Show 4 more statements
Results
- The company said its EBITDA margins had continuously improved over the last 8 to 10 quarters because of a refined product mix, not price hikes or other factors; it upgraded its offerings by adding fluted and soffit panels, furniture profiles, higher-range doors and windows, and a refined range of Modular Furniture products for individual customers, architects and interior designers.
Show source
It's purely because of our refined product mix.
- Fluted business was around INR38 crores in FY24 and stood at INR30 crores in H1.
Show source
Hitesh Agrawal: Yes, fluted, as you ask specifically about the fluted business in FY25, it was somewhere around -- somewhere around INR38 crores in FY24, which stood at INR30 crores itself in this H1 only.
- Modular furniture revenue was Rs. 40.17 crores in FY '25, up 15%.
Show source
Hitesh Agrawal: The exports is somewhere around 15% of the overall revenue of modular furniture.
- Three studio locations are performing well, and their revenue contribution is increasing quarter-on-quarter. Replaced by a later filing.
Show source
So all three studios locations are performing good and contributions -- revenue contribution is also increasing quarter-on-quarter basis.
What it expects ahead
What management expects
- The company is targeting approximately INR65 crores for the complete year.
Show source
Hitesh Agrawal: This year, we are targeting over around INR65 crores approximately for complete year.
- The company has projected an INR5 crores addition to revenue from WPC doors for the current year, their initial year.
Show source
Hitesh Agrawal: For current year, we have projected INR5 crores addition in the revenue from this WPC door being the initial year.
- The company projects business growth of 25% to 30% going forward on a yearly basis in the long term.
Show source
So our overall projection is to achieve 25% to 30% revenue growth in the longer run on a year-on-year basis.
- Exports were around INR4.5 crores last year; it is projecting more than INR6 crores this year, with a target in the range of INR6 crores to INR7 crores compared with last year's INR4.5 crores, after exports of INR3 crores plus in H1.
Show source
So this year target, it should be in the range of INR6 crores to INR7 crores as compared to last year's INR4.5 crores.
- The company expects to convert about 60% to 70% of its order book into revenue next year.
Show source
So next year, we are expecting about 60% to 70% conversion of this order book in the revenue itself.
- The company is looking for around 15% to 18% growth in Modular Furniture in the current financial year.
Show source
Hitesh Agrawal: Yes, Modular Furniture side, we are not projecting very aggressive figures for this as compared to the previous year, somewhere around 15%, 18% growth we are looking for in the current financial year.
Show 14 more statements
What management expects
- EBITDA margin last year was around 21%, and it expects a slightly better margin for the whole of this year compared to the previous year.
Show source
So we do expect this year also with a little bit better margin for the whole year compared to the previous year.
- The new product project is projected to contribute around INR5 crores to INR6 crores of revenue in this financial year, down from the initial estimate of INR15 crores because of a slight delay in project implementation.
Show source
Hitesh Agrawal: We initially at the beginning, in fact, when we started implementing this project, we figured it out INR15 crores contribution in this year, but looking to slight delay in project implementation, so now we are projecting somewhere around INR5 crores, INR6 crores of revenue in this financial year.
- The company has no specific guidance at this stage for FY27 or FY28.
Show source
Hitesh Agrawal: There is no specific guidance at this stage.
- The company expects margins to improve further going forward through product mix and premiumization of its offerings.
Show source
So hopefully, going forward, margins will also have some more improvement.
- The company has priced WPC doors considering maintenance of the existing margin levels for all its product range.
Show source
But yes, so we have done the pricing considering we maintain the existing margin levels for all our product range.
- Aluminum project business executions will start from Q3.
Show source
From the Q3 itself, executions will start happening relative to this project business of aluminum.
- The company said Q4 will witness certain figures for its aluminum business that it can separate as a segment going forward.
Show source
Q4, specifically, we mentioned that Q4 will witness certain figures, which we can separate as a segment also going forward.
- The company hopes its new product will find a good market segment, based on the good response from builders in European countries and Middle East countries.
Show source
That's why we hope that this product will fetch a good market segment in this category.
- The company expects its FY27 results to increase over FY26 results.
Show source
Hitesh Agrawal: Yes, we are expecting it should increase by FY26 results.
Orders
- The company has closed orders of more than INR100 crores for its new aluminum door, windows and facade vertical.
Show source
As we -- sir, also mentioned that we have already closed the orders of more than INR100 crores related to this new vertical of aluminum door, windows and facade.
- Total order book for its uPVC Windows, Doors, aluminum and Modular Furniture project-related verticals is INR240 crores, of which aluminum accounts for INR100 crores plus.
Show source
From this, aluminum itself is having INR100 crores plus.
- Order book includes approximately INR70 crores for uPVC windows, INR140 crores for aluminum windows and facade, and INR30 crores for furniture.
Show source
And aluminum windows and facade order book as of now is INR140 crores and remaining INR30 crores related to the furniture.
- The company has an order book of INR140 crores for its aluminum and facade division as on today.
Show source
This is the initial response to our activity that we have already build the order book of INR100 crores plus, so precisely INR140 crores as on today.
- Upgraded Modular Furniture product range helps it get good orders from projects and exports compared with other competitors.
Show source
Similarly, in other product segment also, in Modular Furniture, we have upgraded our offering product range, so which helps us getting good orders from the projects as well as exports as compared to the other competitors.
What it is building and selling
Projects and capacity
- The company says revenue of INR400 crores plus is easily achievable with existing capacity across all its plants and product verticals.
Show source
Hitesh Agrawal: With the existing capacity across all our plants and product verticals, INR400 crores plus revenue is easily achievable.
- The company has taken up a capacity expansion plan for its extrusion division, initially targeting another 8,000 metric ton of capacity in the next 3 to 6 months; machine orderings have already been taken up.
Show source
So in that, initially, we are targeting to add another 8,000 metric ton capacity in Page 10 of 15 Dhabriya Polywood Limited November 13, 2026 next 3 to 6 months tenure for which machine orderings and everything has already been taken up.
- New Jaipur aluminum facility is under implementation; one or two sets of lines have been commissioned and operations have started, and the facility is expected to be fully implemented by the end of this financial year.
Show source
So fully by the end of this financial year, it will be fully implemented.
Demand and pricing
- Competition from Chinese imports of profiles for ceiling paneling and doors has almost vanished in the last 2 to 3 years, as domestic manufacturing capacity has built up; Dhabriya Polywood said its 34 years in the business, wide range of offerings and ongoing R&D for new solutions helped it achieve better revenue growth with sustained margins.
Show source
But in last 2 to 3 years, we have observed that competition is almost vanished basically.
Segments
- Retention applies to Dhabriya Polywood Limited's project-related uPVC, window, door products and Modular Furniture business; around 5% is withheld from each running bill and becomes payable on project completion plus the defect liability period.
Show source
So whenever we are doing any projects with any builders or developers, usually, there is a close of 5% retention is withheld from every running bills, which became payable on completion of the project plus defect liability period.
- The company has 800-plus channel partners throughout India in all the states for its PVC extrusion B2B business, and major revenue comes from this line of business.
Show source
We are having 800-plus channel partners throughout India in all the states.
Show 6 more statements
Segments
- Studio Arezzo contributes around 20% to 22% of Dhabriya Polywood's Modular Furniture business.
Show source
Current contribution of this in the Modular Furniture, it's somewhere around 20%, 22%, which is coming from the Studio Arezzo business.
- Modular Furniture business is basically in the domestic market; exports are for one particular client from Europe.
Show source
And we are basically in the domestic market only, that export is for one particular client, which comes from the Europe.
- The company recently redeveloped its Mumbai showrooms in line with its new product portfolio.
Show source
In fact, we have recently redeveloped our Mumbai showrooms also in line with our new product portfolio.
- PVC extrusion and doors and windows are Dhabriya Polywood Limited's primary business segment, the key contributor to its top line, and the source of major growth.
Show source
So this is the key segment and which is the major contributor to the top line and the major growth is also coming from this segment.
Deals and partners
- Aluminum business includes clients such as Godrej, MR and M3M; aluminum door, windows and facade orders are generally INR10 crores plus per single order and have execution timelines varying from 12 months to 24 months as per contract.
Show source
And order size is normally for the alumin um door, windows and facade, it's generally INR10 crores plus single order and execution time lines generally varies from 12 months, 15 months to 24 months as per the contract.
- Aluminum windows and facade business primarily serves large builders and developers; new orders have come from both existing relationships and new clients, including builders and developers with whom it has worked on uPVC windows and Modular Furniture since 2006.
Show source
So major new -- these new orders, whatever we have got, so this coming from our existing relations as well as from the new client base also.
Risks, rules and outside factors
Rules and policy
- The import tariff has increased to more than double and 3x, making imported products very competitive with Indian manufacturing products and benefiting Indian manufacturers.
Show source
So it is almost double -- more than double and 3x.
Everything else said on the call
What management stressed
- The company is focused on PVC extrusion and doors and windows, as well as adding product lines such as aluminum windows and facade. Replaced by a later filing.
Show source
Going forward also, we are focused on this as well equally on the addition of the new product lines like the aluminum windows and facade.
What the company said on its earnings call, taken from its own transcript. Not advice.
Questions and answers
Question
So my question was on the line of the business and the segment. So plastic products contributed around INR70 crores in the Q2. And can you give a split between the PVC profile versus B2B and uPVC windows, doors and also the fluted panels?
Answer, hitesh agrawal
Hitesh Agrawal: Yes Sudhir. See the PVC profile for this -- out of the INR70 crores contributed around INR54 crores and INR16 crores came from the Windows division.
Question
Sudhir Shah: Okay. And what was the capacity utilization, sir, on the 27,600 the extrusion capacity for the H1 as it was 66% in the FY26?
Answer, hitesh agrawal
Hitesh Agrawal: Capacity utilization is more than 65% in this first half of the year for the extrusion.
Question
Sudhir Shah: What was the volume growth in the extrusion in this H1 in this half year as compared to the last half year?
Answer, hitesh agrawal
Hitesh Agrawal: Volume growth, it is somewhere around 9,000 tons.
Question
Runit Kapoor: And what is the target for this year?
Answer, hitesh agrawal
Hitesh Agrawal: This year, we are targeting over around INR65 crores approximately for complete year.
Question
Runit Kapoor: So how much are you expecting in this segment for the year?
Answer, hitesh agrawal
Hitesh Agrawal: For current year, we have projected INR5 crores addition in the revenue from this WPC door being the initial year.
Question
Runit Kapoor: Okay. And my last question is now given that H2 is stronger than H1, like what are the guidance for this FY27 and going forward FY28 given your capacity coming live?
Answer, hitesh agrawal
Hitesh Agrawal: There is no specific guidance at this stage. But yes, we have been focusing for the better top line, as we mentioned earlier also. So our overall projection is to achieve 25% to 30% revenue growth in the longer run on a year-on-year basis. So we are on that direction only, building up the capacities and upgrading the product range.
Question
Runit Kapoor: Okay. And the margin should -- is there any scope for improvement in the margins or it should remain at these levels only?
Answer, hitesh agrawal
Hitesh Agrawal: See, margins are already in a very comfortable scenario as of now considering the product range and the market competition. So improvement scope is always there a little bit. So as compared to the previous year also, that we have been able to have some improvement in H1 also by 70 basis points. So we are putting our best efforts by -- on the product mix and premiumization of the offerings. So hopefully, going forward, margins will also have some more improvement.
Question
Runit Kapoor: So if I mean like this new product category like WPC doors, what are the margins expected in those segments?
Answer, hitesh agrawal
Hitesh Agrawal: That we have not that -- we also mentioned earlier in our previous calls. Once we have the market response and some closure of some project orderings, then we'll work out on the realistic margin on this front. But yes, so we have done the pricing considering we maintain the existing margin levels for all our product range.
Question
Runit Kapoor: And lastly, this -- what is the export target for the year, given that you have a contract manufacturing with the European brand for the Modular Furniture? Are we scaling it up or adding new brands or anything?
Answer, hitesh agrawal
Hitesh Agrawal: The exports last year, it was somewhere around INR4.5 crores. So this year, we are projecting more than INR6 crores. In the H1 already, we have done INR3 crores plus export. So this year target, it should be in the range of INR6 crores to INR7 crores as compared to last year's INR4.5 crores.
Question
Akshay Jawahar: No, no, sir, I'm not sure like could you just confirm on the time line? And like were we -- has there basically been some sort of a delay? Like have you pushed it out by a quarter or so? Or was it always intended for Q4?
Answer, hitesh agrawal
Hitesh Agrawal: No, it's not extended. As we -- sir, also mentioned that we have already closed the orders of more than INR100 crores related to this new vertical of aluminum door, windows and facade. Since it involves many processes related to the design approvals, certain structural calculations and customized system development. So everything is on time. From the Q3 itself, executions will start happening relative to this project business of aluminum. Q4, specifically, we mentioned that Q4 will witness certain figures, which we can separate as a segment also going forward.
Show 23 more questions
Question
Akshay Jawahar: Okay. Perfect. And what sort of revenue can we expect to do from this, of this INR100 crores in the current year in FY -- in Q4 FY27 broadly?
Answer, hitesh agrawal
Hitesh Agrawal: No, no, it's not INR100 crores in this Q4. But for the aluminum business, as we mentioned that our existing order book, which is total INR240 crores for three of our different project-related verticals, uPVC, Windows, Doors, aluminum and Modular Furniture. From this, aluminum itself is having INR100 crores plus. So -- which is having the validity different orders and our execution time valid of 18 to 24 months normally. So next year, we are expecting about 60% to 70% conversion of this order book in the revenue itself.
Question
Who are the key clients? And what is the typical project size? And what is the execution time line?
Answer, hitesh agrawal
Hitesh Agrawal: See, we have been disclosing this big large project-related information to the Exchange time -- whenever we are getting it. So if you go through the last published details, so there are several clients involved in this Aluminum business related, which includes some of the prominent name like Godrej, MR, M3M. And order size is normally for the alumin um door, windows and facade, it's generally INR10 crores plus single order and execution time lines generally varies from 12 months, 15 months to 24 months as per the contract.
Question
Tejas Jaiswal: And sir, what is the status of our new Jaipur aluminum facility? When will it be commissioned? And what is the capex?
Answer, hitesh agrawal
Hitesh Agrawal: See it's under implementation. One or two set of lines is already commissioned and operations has already started. So that's the reason we just mentioned that from this quarter itself, we have been really -- we will be starting execution at different projects also. So fully by the end of this financial year, it will be fully implemented. But yes, to start the execution, two lines has already been commissioned and trials and everything is done.
Question
Tejas Jaiswal: Combined. Hitesh Agrawal: Altogether. Tejas Jaiswal: Yes.
Answer, hitesh agrawal
Hitesh Agrawal: So altogether as you mentioned that we are projecting for a business growth of 25% to 30% going forward on a yearly basis in long term.
Question
Sudhir Shah: Yes, the order book is at around INR240-plus crores. So can you please give me the split across the uPVC for windows and doors and then Modular Furniture and the Aluminum facade? Page 8 of 15 Dhabriya Polywood Limited November 13, 2026 Hitesh Agrawal: See, if you look at the precise bifurcation of this order book, so the uPVC windows is somewhere around INR70 crores.
Answer, hitesh agrawal
And aluminum windows and facade order book as of now is INR140 crores and remaining INR30 crores related to the furniture.
Question
Sudhir Shah: Okay. So actually, Modular is very getting traction in the U.S. and the European market. So what is the growth outlook on the Modular Furniture side?
Answer, hitesh agrawal
Hitesh Agrawal: Yes, Modular Furniture side, we are not projecting very aggressive figures for this as compared to the previous year, somewhere around 15%, 18% growth we are looking for in the current financial year. And we are basically in the domestic market only, that export is for one particular client, which comes from the Europe. Sudhir Shah: Okay. And how much that contributes to the overall revenue for the Modular Furniture?
Answer, hitesh agrawal
Hitesh Agrawal: The exports is somewhere around 15% of the overall revenue of modular furniture.
Question
Sudhir Shah: Okay. And also, I want to understand the growth outlook and the dynamics of the aluminum and facade segment?
Answer, hitesh agrawal
Hitesh Agrawal: See, aluminum and facade actual growth outlook, we can predict from the order book. This is the initial response to our activity that we have already build the order book of INR100 crores plus, so precisely INR140 crores as on today. So outlook is very optimistic for this particular division.
Question
Sudhir Shah: And what is the executable time line for the aluminum facade as we have INR140 crores of order book right now?
Answer, hitesh agrawal
Hitesh Agrawal: See it comprises of several orders which ranges from the 12 months to 24 months plus execution time line for different projects.
Question
Sudhir Shah: Okay. Understood. And what kind of margins does this command?
Answer, hitesh agrawal
Hitesh Agrawal: Overall, we are maintaining the similar sort of the margin with 2% or 3% plus/minus between different segments. So this being the new segment, initial margins may be slightly lower 2%, 3% as compared to our overall margin.
Question
Sudhir Shah: Okay. Understood. And also on the Studio Arezzo as a retail side, so how has that performed so far right now?
Answer, hitesh agrawal
Hitesh Agrawal: It's progressing as per our expectations. In fact, we have recently redeveloped our Mumbai showrooms also in line with our new product portfolio. So all three studios locations are performing good and contributions -- revenue contribution is also increasing quarter-on-quarter basis. Page 9 of 15 Dhabriya Polywood Limited November 13, 2026 Moderator: Next question comes from the line of Gunit Singh with Counter Cyclical.
Question
Gunit Singh: Can you please help me understand the aging of receivables? How much is over 6 months? How much is over 1 year and 2 years and so on?
Answer, hitesh agrawal
Hitesh Agrawal: See, basically, that actual aging is usually derived at the end of the year, which you can see from our audited financials also, but if it's on the same line. Our trade receivables includes the retention money component also, which is in the range of around INR8 crores to INR10 crores of overall, which belongs to different longer periods, so maybe 6 months, 1 year or in some cases more than 1 year where the project is of the bigger side. But the regular debtor cycle of our -- all 3 verticals is in the range of 30 to 45 days only.
Question
Gunit Singh: Got it. And these retentions are related to what kind of -- which segment and what kind of -- which products? And generally, how much is the retention 1-year period?
Answer, hitesh agrawal
Hitesh Agrawal: The retention is usually on the project-related business, which belongs to the uPVC, window, door products and Modular Furniture. So whenever we are doing any projects with any builders or developers, usually, there is a close of 5% retention is withheld from every running bills, which became payable on completion of the project plus defect liability period.
Question
Gunit Singh: Got it. Sir, my second question is regarding our total capacity. So what is the revenue potential from current capacity? And if you can help me understand how much of additional capacity are we coming up with in the coming financial year? And what are the time lines?
Answer, hitesh agrawal
Hitesh Agrawal: With the existing capacity across all our plants and product verticals, INR400 crores plus revenue is easily achievable. And as we mentioned in our previous con calls also, it is not practically possible to go for 100% capacity utilization and then go for the further capacity enhancement. So because in extrusion, we need to have multiple lines to run different molds for different product applications. So that's the reason we have already taken up the capacity expansion plan for our extrusion division also. So in that, initially, we are targeting to add another 8,000 metric ton capacity in Page 10 of 15 Dhabriya Polywood Limited November 13, 2026 next 3 to 6 months tenure for which machine orderings and everything has already been taken up.
Question
Gunit Singh: Got it. And sir, my last question is regarding our target segments and basically out of our segments, which one are the fastest growing and which one would be the drivers of growth over the coming financial year according to you?
Answer, hitesh agrawal
Hitesh Agrawal: See, our primary business segment is related to the PVC extrusion and door, windows. So this is the key segment and which is the major contributor to the top line and the major growth is also coming from this segment. Going forward also, we are focused on this as well equally on the addition of the new product lines like the aluminum windows and facade. So this seems to be very lucrative in terms of the revenue generation going forward because the order book itself speaks about that.
Question
Gunit Singh: Got it. And with this aluminum and facade extrusion, I mean, what kind of EBITDA margin should we expect over the coming quarters and the next financial year?
Answer, hitesh agrawal
Hitesh Agrawal: See, EBITDA margin last year, we have seen, was at around 21%. So we do expect this year also with a little bit better margin for the whole year compared to the previous year.
Question
Gunit Singh: Got it. And can you share the product-wise EBITDA margin profile, I mean, steady-state EBITDA margin that we can expect?
Answer, hitesh agrawal
Hitesh Agrawal: It's not been regularly monitored or captured. But yes, I'll do one, you can just share what it is. So going forward, we will update you on that. As of now, it is not ready. But as you mentioned, that EBITDA margin for different product segment, it's on the same line, with the 2% or 3% plus/minus, wherein the extrusion is having the better margin as compared to the other line of business.
Question
Akshay Jawahar: It should be close to INR20 crores. And the WPC doors as well, like we were WPC door and the wall...
Answer, hitesh agrawal
Hitesh Agrawal: We initially at the beginning, in fact, when we started implementing this project, we figured it out INR15 crores contribution in this year, but looking to slight delay in project implementation, so now we are projecting somewhere around INR5 crores, INR6 crores of revenue in this financial year.
Question
Akshay Jawahar: And for FY28, how much do you think we'll get from this segment broadly, not a very active number to understand?
Answer, digvijay dhabriya
Digvijay Dhabriya: Yes, because this is a new product for the Indian market. So we are waiting for the response of the customers. But looking to the response in European countries and Middle East countries, the tremendous response -- a good response was there from the builders. That's why we hope that this product will fetch a good market segment in this category.
Question
Akshay Jawahar: All right. And sir, on the Modular Furniture piece, like I think in H1 last year, we've done about INR25 crores revenue and in this INR24 crores, INR25 crores. And in this H1, we've done about INR16 crores. Any specific reasons for the dip in this? And how do we see this segment playing out for the rest of the year?
Answer, hitesh agrawal
Hitesh Agrawal: Yes. Last year, H1, it was around INR23 crores. And against that, yes, we have done INR16 crores. There is a slight delay in some of the project-related executions. So from the last month itself, that has started getting delivered. So in this 6 months, we are expecting to pop up all this backlog.
Question
Akshay Jawahar: So for the whole year for FY27, would we broadly meet and exceed FY26? Or do you think that will be difficult given the H1 that we had?
Answer, hitesh agrawal
Hitesh Agrawal: Yes, we are expecting it should increase by FY26 results.
Answer, hitesh agrawal
Thanks. Jitendraji. See the channel partners related to our PVC extrusion B2B business, which you can say retail also. As such, there is no direct retail service of any of our product. But it's purely B2B extrusion. We are having 800-plus channel partners throughout India in all the states. And major revenue comes from this line of business only.
Question
Jitendra Lokhande: Got it. And what percentage would be currently out of the total revenue?
Answer, hitesh agrawal
Hitesh Agrawal: Yes. Current contribution of this in the Modular Furniture, it's somewhere around 20%, 22%, which is coming from the Studio Arezzo business.
Question
Gunit Singh: Basically, my question is regarding sustainability of margins. In FY25, margins were -- EBITDA margins were 16%, whereas in currently, it's about 21%, 22%. So I want to understand how much of these margins were temporarily related to price hikes due to the Iran war maybe because of which...
Answer, hitesh agrawal
Hitesh Agrawal: Thanks Gunitji for your question. See, if you see our last well 8, 10 quarters performance, so EBITDA margins has been continuously improving being at the higher bracket only. So this is not because of any sort of the price hikes or other factors. It's purely because of our refined product mix. In fact, we have upgraded our offerings throughout different segments. Earlier wherein the volumes were coming from the low cost or high competition sort of products. So now -- which we have upgraded by adding the fluted and soffit panels, furniture profiles, higher range of the doors and windows and very refined range of Modular Furniture products to cater the individual customers, architects and interior designers.
Question
Gunit Singh: What percentage of revenues came from fluted, etcetera?
Answer, hitesh agrawal
Hitesh Agrawal: Yes, fluted, as you ask specifically about the fluted business in FY25, it was somewhere around -- somewhere around INR38 crores in FY24, which stood at INR30 crores itself in this H1 only.
Answer, hitesh agrawal
Hitesh Agrawal: Thanks, Prithviji. See, regarding competition for our different product segment, if I speak about the extrusion, earlier, there used to be wider competition from the Chinese import of profiles related to the ceiling paneling and doors also. But in last 2 to 3 years, we have observed that competition is almost vanished basically. I would say not reduced, it's almost vanish. In today's scenario that it is the domestic manufacturing capacity has built up. And since we are into this line of business from since last 34 years and built up our range -- very wide range of offerings and continuously R&D is happening for addition of the new solutions and all those things. So with that, we have been able to cater better revenue growth with the sustained margins.
Answer, hitesh agrawal
Similarly, in other product segment also, in Modular Furniture, we have upgraded our offering product range, so which helps us getting good orders from the projects as well as exports as compared to the other competitors.
Answer, digvijay dhabriya
Digvijay Dhabriya: The import tariff has also improved a lot. So it is almost double -- more than double and 3x. So the cost of the product -- imported products are also very competitive with the Indian manufacturing products. So the Indian manufacturers are now on the benefit side. Prithvi: Okay. That's great. And also on the aluminum and facade division, what are the channels we are planning to sell into?
Answer, hitesh agrawal
Hitesh Agrawal: See, aluminum windows and facade basically, it's related to -- this business is primarily comes from the large builders and developers. Since we are working with them for our uPVC window and modular furniture products from 2006 itself, almost 20 years, we have associations with very large number of established builders and developers. So major new -- these new orders, whatever we have got, so this coming from our existing relations as well as from the new client base also. Page 14 of 15 Dhabriya Polywood Limited November 13, 2026 Moderator: As there are no further questions from the participants, I now hand the conference over to the management for the closing remarks.
Answer, digvijay dhabriya
Digvijay Dhabriya: Okay. Thank you very much. I sincerely thank everyone for joining today's call and for your valuable questions. I hope we have been able to address most of your queries. Looking ahead, we remain confident in our growth prospects, supported by our record order books, expanding manufacturing capabilities and new product verticals. We also welcome our investors and stakeholders to visit our facility and gain a closer understanding of our operations and ongoing expansions. We remain committed to sustainable growth, improving profitability and creating long-term value for our shareholders.
Questions about this call
- When was the Dhabriya Polywood Q2 FY27 earnings call transcript filed?
- Dhabriya Polywood filed the transcript with the exchange on 17 Nov 2026. This page is built from that transcript.
- What does this page list?
- 44 statements from the transcript across 9 topics, 19 of them with a figure. Each statement is shown with the transcript sentence it came from.
- Are the analysts' questions included?
- Yes. 33 questions and management's answers are listed in the order they were asked, as the transcript prints them.
- Who wrote this page?
- DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.