Earnings call
Jindal Stainless Q3 FY25 earnings call: Jindal Stainless Limited's volume guidance for this fiscal year is around 10%
By DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person.
Transcript filed .
Volume guidance for this fiscal year is around 10%. The company has spent around INR2,700 crores of its INR5,500 crores capex for the year on acquisitions, including Chromeni, the last tranche of NPI, some working capital and the SMS facility; it has also spent around INR1,100 crores on other capex so far. Share for 200 series was around 38%, 300 was 46%, and 400 was 16% in quarter 3 FY '25. The company said prices differ substantially between the 200 series and 300 series, with the 400 series between them. CR share was around 45% of its melt, and its target was to take it to 75%.
The numbers management gave
Results
- Share for 200 series was around 38%, 300 was 46%, and 400 was 16% in quarter 3 FY '25.
Show source
Shreya Sharma: So 200 series, share was around 38%.
- Share for 200 series was 36%, 300 was 46%, and 400 was 17% for 9 months.
Show source
And for 9 months, it was 200, 36%.
- Rabirun is producing approximately 4,000 tons per month on its polishing line.
Show source
We are producing approximately at a rate of around 4,000 tons per month over there.
- Chromeni is touching around 15,000, 20,000 tons per month as it ramps up.
Show source
So now almost hitting a volume of around 15,000, 20,000 tons per month already, we are seeing it, touching over there.
- Blended average realization was INR1,71,283 per ton in Q3 FY '25.
Show source
So this quarter, average realization was INR1,71,283 per ton.
- The company said average realization depends on product mix and underlying raw material prices, which are largely passed through; when raw material prices rise, average realization falls.
Show source
When the raw material prices goes up, the average realization goes down.
What it expects ahead
What management expects
- Volume guidance for this fiscal year is around 10%.
Show source
In terms of EBITDA per ton, we should do around INR17,000 crores for this fiscal year, and our volume guidance is around 10%.
- The company expects EBITDA per ton of around INR17,000 crores for this fiscal year.
Show source
In terms of EBITDA per ton, we should do around INR17,000 crores for this fiscal year, and our volume guidance is around 10%.
- Maximum volume this year is 30,000 tons.
Show source
Abhyuday Jindal: Max 30,000 tons this year.
- The company expects to deliver INR20,000-plus of EBITDA per ton on a consolidated basis in FY '25, with increased volumes and JUSL maintaining the same level of EBITDA per ton.
Show source
So that's why we are saying INR20,000-plus of EBITDA per ton, we'll be able to deliver on FY '25 on a consol basis.
- The company maintains its guidance for closing FY '25 debt of around INR5,500 crores and expects it may do a bit better depending on inventory levels.
Show source
So we maintain our closing debt guidance of around close to INR5,500 crores.
- The company expects a tax shelter to appear in '27, and some of it may appear in '26, after it merges the entity into its core operations.
Show source
And then I would say not immediately next year, but '27, we should see some of the tax shelter appearing into that because maybe '26 and we can see some of the things coming up.
Show 8 more statements
What management expects
- The company has not given its volume guidance for next fiscal because it is waiting to see what Mr. Trump does and the upcoming budget, which it expects will give it a better picture.
Show source
So I think that will give us a much better picture to give you our volume guidance for next fiscal.
- Volume guidance and EBITDA per ton guidance are combined and include Chromeni; it will not give separate guidance for Chromeni assets.
Show source
Anurag Mantri: No. So overall volume guidance, Ritesh, we will not be giving separate guidance for the Chromeni assets because as Rajeev was mentioning, that CR is the one which is more saleable in terms of so our volume guidance and EBITDA per ton guidance will always be combined including of Chromeni.
- The company has not given a specific guidance range because it depends on how the export market and Indian market growth pan out, especially with Chinese dumping.
Show source
Page 6 of 17 Jindal Stainless Limited January 30, 2025 Anurag Mantri: So as Abhyuday mentioned that let's wait for some time to give us the specific numbers on the guidance range because it lot depends on how the export market pans out and how the Indian markets, actually the growth pans out, especially all these Chinese dumping and certain things.
- The company does not give separate guidance for Rabirun and Chromeni; it gives blended guidance because both units will be added to overall sales.
Show source
We give a blended guidance because both Rabirun and Chromeni will get added to our overall sales.
- The company expects to deliver good export volumes next year despite the export market having drastically dipped and the challenges it is facing.
Show source
Since export market has drastically dipped, we still feel we will deliver good export volumes even next year despite all these challenges that we are facing.
- The company is maintaining its export volume guidance despite competition, with no major increase in any of the other geographies.
Show source
So despite that, we're still maintaining our export volume guidance.
- Tarun Khulbe said Jindal Stainless Limited would provide revised return figures for the Indonesia JV after waiting for some more time.
Show source
Tarun Khulbe: So I mean, like I said it before that on this, the return and this, I think we should wait for some more time and then we come back with these numbers.
- The company asked investors to wait for some time before providing profitability numbers for the Indonesia JV under the current scenario.
Show source
Anurag Mantri: As Tarun just mentioned, I think just wait for some time because to get that exactly the profitability numbers on the current scenario for that JV.
What it is building and selling
Projects and capacity
- The company has spent around INR2,700 crores of its INR5,500 crores capex for the year on acquisitions, including Chromeni, the last tranche of NPI, some working capital and the SMS facility; it has also spent around INR1,100 crores on other capex so far.
Show source
Out of that almost INR2,700 crores was we have spent on the various acquisitions though which has already gone, which include the Chromeni, which includes the last tranche of NPI and some of the working capital.
- Some of Jindal Stainless Limited's brownfield capex may be deferred to next year, depending on progress.
Show source
Some of the brownfield capex may get deferred to next year, but depending on the progress because with that.
Demand and pricing
- The company said prices differ substantially between the 200 series and 300 series, with the 400 series between them.
Show source
And second is also on the product mix because the prices between the 200 series and 400 -- sorry, 300 series, there is a vast difference between the two.
- The company is continuing its efforts in South Korea, the Middle East, South America and Japan, which was a first entry, and plans to keep increasing its presence there.
Show source
Like I said, South Korea, Middle East, South America, Japan was more a first entry for us, and we're going to keep trying to keep increasing.
- The company is competing with Chinese and other Asian players in its export markets.
Show source
So we are competing always with a lot of Chinese and other Asian players.
- The company cited low-priced imports as an ongoing pressure on the domestic market.
Show source
Despite ongoing pressures of low- Page 16 of 17 Jindal Stainless Limited January 30, 2025 priced imports, we continue to demonstrate our leadership given the wide distribution network, technological progress and product supremacy.
Show 3 more statements
Demand and pricing
- Demand for CR in stainless steel is more than demand for HR. Replaced by a later filing.
Show source
Abhyuday Jindal: So I can first answer at an overall level and in terms of definitely, the demand of CR in stainless steel is more than HR.
- The US stainless steel industry is short of capacity relative to its demand, even at the current level without an infrastructure push. Replaced by a later filing.
Show source
And just to give you the perspective on US stainless steel industry, even at the current level without even infra push, they are short of the capacities in terms of their demand.
Segments
- CR share was around 45% of its melt, and its target was to take it to 75%.
Show source
And as a company, we were always around 45% of our melt was CR, and our target was to take it to 75%.
Risks, rules and outside factors
Outside factors
- The company said stainless steel profitability does not rise with prices in the same way as carbon steel because raw material costs have a pass-through impact.
Show source
So it's not exactly like a carbon steel where the prices goes up, the profitability increases because ultimately, there is a pass-through impact on that.
Rules and policy
- The US tariff on Indian is currently 25% and is continuing.
Show source
The US tariff on Indian is currently 25%, which is the Trump tariff which was put in earlier.
- The company invested in Indonesia because it expected the government to further restrict ore and NPI exports; the investments are intended to avoid impact from a quota system and help increase nickel prices.
Show source
Abhyuday Jindal: So that is the reason why we went and made investments into Indonesia because we already got those fillers that government would be going further more restrictive on ore export and then NPI export, so which is why we have further gone with these investments in Indonesia.
Everything else said on the call
What management stressed
- The company says the real growth and the real story is based on India. Replaced by a later filing.
Show source
Bu t the real growth and the real story is all based on India again.
Group structure
- Chromeni was an acquisition in line with Jindal Stainless Limited's target to increase CR to 75% of its melt.
Show source
So Chromeni was an acquisiti on in line with that.
- The company expects the JCL transaction to be completed within the next 4 weeks to 6 weeks; it has received all approvals and is completing formalities and process steps.
Show source
So JCL, the transaction will be completed now within the probably next 4 weeks to 6 weeks.
- The company is progressing with the sale of assets at the Indonesia CR mill and expects to fetch around $20 million; it will look at the land sale separately.
Show source
And approximate, we are likely to fetch around $20 million from that asset. and then after that, we'll look for the land sale separately.
What the company said on its earnings call, taken from its own transcript. Not advice.
Questions and answers
Question
Amit Dixit: Okay. So is it safe to assume that a similar notification can be issued for stainless steel considering the injury that we have suffered as an industry?
Answer, abhyuday jindal
Abhyuday Jindal: Yes, absolutely. So like I said, steel is moving a bit faster than us. We are maybe 2 or 3 weeks behind them, but similar thing is on.
Question
Amit Dixit: Okay. Sure. Now a little bit different question. I have been observing in the press release that we have actually initiated product development and very niche applications. For instance, in defense, particularly, we have supplied to HAL, the low-alloy products. Now in India, we have, of course, a long -- I would say, a good runway for nuclear power plants and that they are expected to use stainless steel in a good measure. So can you please highlight some of the product developments in these niche areas that we are doing apart from the regular ones that we are aware of like in infra, processing, railways, etcetera?
Answer, abhyuday jindal
Abhyuday Jindal: So absolutely, rightly correctly you said, this has always been a key focus for the company to further add more value-added products. And in every sector that we see good growth coming in domestically, we are going to be part of it. So nuclear, absolutely. We anyway have been supplying globally to a lot of prestigious nuclear projects. Page 4 of 17 Jindal Stainless Limited January 30, 2025 So this has been a regular phenomenon, and further development is on. Defense aerospace is another interesting area, where every time, more and more product ranges are getting added. So we've been supplying to BrahMos.
Answer, abhyuday jindal
As you know, we've been supplying to a lot of missile applications and all satellite programs we are part of. So every launch that goes out from ISRO and also private companies now, some material parts will be there. And apart from that, hydrogen economy is another focus area of ours. Ethanol blending plant, desalination plants, a lot of efforts are being made to further develop products for this and also working on substituting other metals into stainless steel. So whenever corrosion is a problem, a lot of sales development, business development activities are on to convert them into stainless steel.
Question
Ritesh Shah: A couple of questions. First is, would you like to revisit the guidance that you have given for volume growth for this fiscal and EBITDA per ton, specifically on stand -alone basis? And when we say stand-alone, just wanted a clarification, does it include any of Chromeni, Rathi or RUVL? Or are those volumes over and above the stated volume guidance?
Answer, abhyuday jindal
Abhyuday Jindal: Stand-alone, when we talk stand-alone, Ritesh, and we're continuing with our guidance for this year. In terms of EBITDA per ton, we should do around INR17,000 crores for this fiscal year, and our volume guidance is around 10%.
Question
Ritesh Shah: This would exclude Chromeni?
Answer, abhyuday jindal
Abhyuday Jindal: We're not changing that guidance, which we revised during the middle of this year.
Question
Ritesh Shah: Okay. And when we say volume guidance, this excludes Chromeni, right?
Answer, abhyuday jindal
Abhyuday Jindal: This excludes Chromeni for this fiscal year, absolutely.
Question
Ritesh Shah: Okay. And for the next fiscal, any volume guidance that you are looking at?
Answer, anurag mantri
Anurag Mantri: Ritesh, it's inclusive of all the Chromeni volumes.
Question
Ritesh Shah: Is it for this year? Or when we say -- like my next question was...
Answer, anurag mantri
Anurag Mantri: The Chromeni volumes are very low this year. We just started stabilizing. This year, I think we are targeting -- how much?
Answer, abhyuday jindal
Abhyuday Jindal: Max 30,000 tons this year. So it will be hardly much distant from that perspective. So that's why we're not really changing our guidance.
Question
Is it possible if you could narrow it further into low double digit or high double digit? It will help us in modelling stuff.
Answer, abhyuday jindal
Abhyuday Jindal: I think, Ritesh, it's a little early for us to give that figure because now there are a few things that we are waiting and watching as compared to what Mr. Trump does, Our budget is also coming up next couple of days. So I think that will give us a much better picture to give you our volume guidance for next fiscal.
Question
Ritesh Shah: Sure. That's helpful. My second question was again on volumes. Now when we give stand-alone volume numbers, is it possible for us to dissect between HR and CR? The reason to ask this question is, there is 0.6 million tons Chromeni, which comes in, which gives us additional flexibility on CR and, hence, CR as a percentage of total spend will actually increase. So I wanted to understand, what is the sort of impact or bearing it has on profitability and our ability to put that volume in the marketplace? Is the demand for CR locally more than HR? So how does it stack up versus what the offering that we have in the marketplace right now post Chromeni?
Answer, abhyuday jindal
Abhyuday Jindal: So I can first answer at an overall level and in terms of definitely, the demand of CR in stainless steel is more than HR. And as a company, we were always around 45% of our melt was CR, and our target was to take it to 75%. So Chromeni was an acquisiti on in line with that. And anything, Rajeev, you can add?
Answer, rajeev garg
Rajeev Garg: Yes. So this is Rajeev Garg. I head the sales at Jindal Stainless. So globally, if you see, the CR - to-HR ratio is typically 80-20. 80% for consumption in the market is cold rolled whereas 20% is hot rolled, so that's sheets, coil and plates. But in the developing economy, this ratio is slightly more skewed towards hot rolled, which is like 70-30 because the process industry requires a lot of hot-rolled material. So again, in terms of your second question that is there a market for cold rolled and all?
Answer, rajeev garg
Yes, actually, as Abhyuday Ji also mentioned that we as a company, are always short of cold rolled, and we are very confident that with Chromeni volume, we'll be able to kind of serve many segments in which we were strategically keeping low market share because of production issues.
Question
Ritesh Shah: Sure. I'll just stretch this a little bit. Sorry, sir, I think it's important. Sir, basically, when we are saying that we do more of CR, it essentially means there will be HR-to-CR conversion. Would it essentially mean that it poses upside risk to the EBITDA guidance that we are looking at? And again, I think Mantri Ji indicated that we will factor Chromeni numbers in next fiscal numbers. So wouldn't that be double counting?
Answer, anurag mantri
Anurag Mantri: No. So overall volume guidance, Ritesh, we will not be giving separate guidance for the Chromeni assets because as Rajeev was mentioning, that CR is the one which is more saleable in terms of so our volume guidance and EBITDA per ton guidance will always be combined including of Chromeni. Ritesh Shah: Okay. And what is the trajectory that it can move by -- given we have more CR versus HR right now, given we have 0.6 million tons commissioned for those incremental volumes? Page 6 of 17 Jindal Stainless Limited January 30, 2025 Anurag Mantri: So as Abhyuday mentioned that let's wait for some time to give us the specific numbers on the guidance range because it lot depends on how the export market pans out and how the Indian markets, actually the growth pans out, especially all these Chinese dumping and certain things.
Answer, anurag mantri
That's why we are saying that we are targeting double -digit growth, but I think let's wait for some time to be very specific on the range.
Show 15 more questions
Question
Parthiv Jhonsa: Yes. Volume or the share, whatever is possible.
Answer, shreya sharma
Shreya Sharma: So 200 series, share was around 38%. And 300, 46%. 400 was 16%. This, I'm talking about quarter 3 FY '25. And for 9 months, it was 200, 36%. 300 was 46%. And 400 was 17%.
Question
Parthiv Jhonsa: Okay. Sir, just to take a couple of analysts who have already hopped on this question pertaining to the volume. Just to take it a bit forward, I believe, somewhere in the print media today and even on the TV today, I think, sir had mentioned that you are actually reducing your guidance to 9%, if I'm not mistaken. And right now, I think you just reiterated that it is about 10%, which is unchanged. Am I reading that wrong? Or is there any ambiguity out there? If you can just throw some light on it?
Answer, abhyuday jindal
Abhyuday Jindal: No. It will be in the range between 9% to 10%. So we revised it during the mid of this year, which was around 9% to 10%. And we are keeping that intact.
Question
Parthiv Jhonsa: Okay. So there is no further reduction from there, right?
Answer, abhyuday jindal
Abhyuday Jindal: There was no further revision or guidance revision.
Question
Parthiv Jhonsa: And sir, if I may just squeeze a very quick third one. So what will be the status on Rabirun and Rathi right now? And currently, what is the realization, what you're getting from Chromeni?
Answer, tarun khulbe
Tarun Khulbe: So on Rabirun, we are running in Rabirun our polishing line because that is what we have started and we are finding there the market to be better. We are producing approximately at a rate of around 4,000 tons per month over there. And Chromeni, now as Abhyuday said that we have started and we have started ramping it up. So now almost hitting a volume of around 15,000, 20,000 tons per month already, we are seeing it, touching over there.
Question
Parthiv Jhonsa: So possible to give some margin guidance for Rabirun and Chromeni going forward? Because in the past, you had already indicated for Rabirun and Rathi, but is it possible to give it once again, considering the current scenario?
Answer, abhyuday jindal
Abhyuday Jindal: We don't give separate guidance. We give a blended guidance because both Rabirun and Chromeni will get added to our overall sales. It's a midterm process, you can say. So that's why we give overall guidance, generally encompasses both these units.
Answer, rajeev garg
Rajeev Garg: Okay. So first point, in the proportion today, US is roughly around 15-20% of our export mix. So that's one part. Sorry, I couldn't catch your first question.
Answer, anurag mantri
Anurag Mantri: That how the Trump administration...
Question
Anupam Gupta: Yes, how do you look at that in terms of possible duties there?
Answer, rajeev garg
Rajeev Garg: Yes. So see, India as a country, I mean, we all...
Answer, abhyuday jindal
Abhyuday Jindal: So Anupam, I'll take this. So basically, our focus for the last few quarters, a fe w years has been domestic. We are seeing most of the green shoots coming in the domestic market, and that is where we've been very bullish. Export has always been a second priority for us. And export, we would always use as a factor that our long -term customers, we still want to service, which we will continue and to protect our margin. Since export market has drastically dipped, we still feel we will deliver good export volumes even next year despite all these challenges that we are facing. Bu t the real growth and the real story is all based on India again.
Answer, abhyuday jindal
So that is our real focus, and like Rajeev was mentioning, US is around 20% of our export. I would say despite any further major change in Trump tariff, I think this will still continue. I don't see much dip happening, and the other positive side with US is that they will also come with a lot of capex expenditure, from infra spending to other areas where we, as a company, can cater to them quite efficiently. So definitely, it's kind of a wait -and-watch situation with what's going to happen in the US But despite that, we're still extremely bullish on th e India story, and we still continue to export to our long -term customers.
Answer, anurag mantri
Anurag Mantri: Anupam, just to add the data point. The US tariff on Indian is currently 25%, which is the Trump tariff which was put in earlier. So that's still continuing. And whatever we are doing in the US Page 8 of 17 Jindal Stainless Limited January 30, 2025 market is with the range of that tariff. So it's unlikely it could increase. We'll have to wait and watch, but it's unlikely to be increasing further, especially that. And just to give you the perspective on US stainless steel industry, even at the current level without even infra push, they are short of the capacities in terms of their demand.
Answer, anurag mantri
So as Abhyuday mentioned, if the demand push comes, then they will further be short of the capacities. And at least the Mexico and Canada, they are very clear. They will be putting a duty. So that will be clear. That should be able to give us some of the better opportunity in US to participate in US market.
Question
Tushar Chaudhari: Sir, we were trying for some other nations like Japan and all South Korea. Is that...
Answer, abhyuday jindal
Abhyuday Jindal: So that is continuing. Like I said, South Korea, Middle East, South America, Japan was more a first entry for us, and we're going to keep trying to keep increasing. But again, overall, if you understand the world, China is also pushing material as much in all those markets. So we are competing always with a lot of Chinese and other Asian players. So despite that, we're still maintaining our export volume guidance. But yes, no major increase in any of the other geographies.
Answer, abhyuday jindal
We could have pushed more material in the domestic market, but to protect our margin also, we did not go as aggressive. So that oppor tunity and that kind of flexibility, we keep in sight. So we have to grow, show a good volume growth also every time while protecting our margins. It's because export market, for the last 2 to 3 years, is completely been subdued and market has been going down, which is why that pressure on domestic front, you can see.
Question
Vikash Singh: Understood. Sir, one more question regarding -- basically, we have said that the yearly guidance on a consolidated basis could be around INR20,000 crores. But 9 months, they are already at close to INR21,000 crores. So am I mistaking it that the 4Q would be a weaker -- continue to be weaker in terms of EBITDA per ton or... Page 10 of 17 Jindal Stainless Limited January 30, 2025 Anurag Mantri: No, if you see, the consol number is around INR20,837, you are right.
Answer, anurag mantri
So what we have said is that we will try to maintain in this range itself because JUSL will continue to be the same level of EBITDA per ton. Volumes will increase. So that's why we are saying INR20,000-plus of EBITDA per ton, we'll be able to deliver on FY '25 on a consol basis.
Question
Vikash Singh: Understood. And sir, our debt takeout targets and if you could like to share?
Answer, anurag mantri
Anurag Mantri: So if you recall, last quarter, we gave a guidance of c losing FY '25 debt of around INR5,500 crores, which on the back of the 5,500 crore similar sort of number of the capex what we announced. Though some of the EBITDA per ton has come down a bit, but more or less, we should be able to maintain the same guidance. And probably, we should be able to do a bit better, depending on the inventory levels. But otherwise, capex-wise, we are on track within those range. So we maintain our closing debt guidance of around close to INR5,500 crores. We'll try to improve further on that.
Question
Ritesh Shah: Okay. That's fine. My second question was on corporate restructuring. Are there any updates on JCL and Indonesia CR mill? I think we had indicated on JCL some vendor approval was pending Page 13 of 17 Jindal Stainless Limited January 30, 2025 and Indonesia CR mill, the timeline was given by March. Any updates over here and kind of proceeds that you expect from both these events?
Answer, anurag mantri
Anurag Mantri: Okay. So JCL, the transaction will be completed now within the probably next 4 weeks to 6 weeks. We have got all the approvals, and now we are just completing the more formalities and process steps. So that will be there. On Indonesia CR mill, the sale of assets has been -- is in the progress. And approximate, we are likely to fetch around $20 million from that asset. and then after that, we'll look for the land sale separately. We'll see that how to monetize the land or what are the next steps.
Question
Ritesh Shah: No worries. Perfect. And lastly, Mantri ji, anything on the tax rates given Chromeni has started, I would presume that Rathi, RUVL, Chromeni, they had some sort of history cumulative losses might be there. So is there any benefit that we expect at JSL level, say, FY '26, FY '27? How should we look at it?
Answer, anurag mantri
But depending on that how we actually envisage the plan for the future. So probably once we do that, I think then there would be a tax shelter available. And then I would say not immediately next year, but '27, we should see some of the tax shelter appearing into that because maybe '26 and we can see some of the things coming up.
Answer, anurag mantri
Anurag Mantri: So Ritwik if you see, out of INR5,500 crores capex, if you recall that the capex number for the year was INR5,500 crores. Out of that almost INR2,700 crores was we have spent on the various acquisitions though which has already gone, which include the Chromeni, which includes the last tranche of NPI and some of the working capital. And also the SMS facility. So that's there. And then besides the other capex, around INR1,100 crores has been spent on the other capex so far. So it's progressing well. Some of the brownfield capex may get deferred to next year, but depending on the progress because with that.
Answer, abhyuday jindal
Abhyuday Jindal: So that is the reason why we went and made investments into Indonesia because we already got those fillers that government would be going further more restrictive on ore export and then NPI export, so which is why we have further gone with these investments in Indonesia. So we should not be impacted really by any kind of quota system. And further, it will help increase the price of nickel also.
Question
Rohan Vora: Got it. Got it. And the second question was on the JV, the Indonesia JV. So you had earlier said that because of the lower nickel prices, our ROCE on that will be lower. So what is the view on that? Earlier, we had planned to get 25% ROCE out of it, but what would be the revised number?
Answer, tarun khulbe
Tarun Khulbe: So I mean, like I said it before that on this, the return and this, I think we should wait for some more time and then we come back with these numbers. Page 15 of 17 Jindal Stainless Limited January 30, 2025 Rohan Vora: Okay.
Question
Rohan Vora: Right, right. So any guidance on what amount of PAT that would flow from?
Answer, anurag mantri
Anurag Mantri: As Tarun just mentioned, I think just wait for some time because to get that exactly the profitability numbers on the current scenario for that JV.
Question
Prasanth Gopal: Yes, if you have any views on that near term?
Answer, anurag mantri
Anurag Mantri: See, stainless steel, if you see, it's -- the prices of average realization, if you see in our thing is depending on the two things. One is that our product mix and also the underlying raw material prices because it's quite a lot of raw material prices are on a pass-through basis. When the raw material prices goes up, the average realization goes down. So it's not exactly like a carbon steel where the prices goes up, the profitability increases because ultimately, there is a pass-through impact on that. And second is also on the product mix because the prices between the 200 series and 400 -- sorry, 300 series, there is a vast difference between the two. I mean 400 is in between.
Question
Prasanth Gopal: Yes, sir. So what sort of -- if you take stainless steel 304 grade, where are we current now, the prices versus the third quarter average, if you can give that data?
Answer, anurag mantri
Anurag Mantri: Individual grade-wise prices, we don't give average realization of the -- for us, we can give you that average realization what comes to the blended. So this quarter, average realization was INR1,71,283 per ton.
Answer, abhyuday jindal
Abhyuday Jindal: Thank you and let me also thank everyone for attending this call. In closing, I would like to reaffirm our confidence in the growth of the domestic market. Despite ongoing pressures of low- Page 16 of 17 Jindal Stainless Limited January 30, 2025 priced imports, we continue to demonstrate our leadership given the wide distribution network, technological progress and product supremacy. I hope that we have been able to answer all your questions satisfactorily. Should you need any further clarification or would you like to know more about the company, please feel free to contact our Investor Relations team. Thank you once again and speak to all of you soon.
Questions about this call
- When was the Jindal Stainless Q3 FY25 earnings call transcript filed?
- Jindal Stainless filed the transcript with the exchange on 4 Feb 2025. This page is built from that transcript.
- What does this page list?
- 36 statements from the transcript across 9 topics, 18 of them with a figure. Each statement is shown with the transcript sentence it came from.
- Are the analysts' questions included?
- Yes. 25 questions and management's answers are listed in the order they were asked, as the transcript prints them.
- Who wrote this page?
- DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.