Earnings call
Lumax Auto Technologies Q2 FY27 earnings call: Lumax Auto Technologies Limited expects approximately 14% of its order book to be executed in FY 27, 59% in FY 28, and the remaining 27% in FY 29
By DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person.
Transcript filed .
The company expects approximately 14% of its order book to be executed in FY 27, 59% in FY 28, and the remaining 27% in FY 29. The company expects growth to moderate somewhat in H2 FY 27 as the industry moves past the lower base of H1 and the full benefit of GST rate cuts gets reflected in demand. Lumax Greenfuel Energy Solutions commenced production at its Nashik facility in Q3 FY 27, supplying ferrule-less tubes and fittings and receptacles to Mahindra & Mahindra. Consolidated EBITDA was ₹228 crores in Q2FY27, up 34% year-on-year from ₹170 crores in Q2FY26, and its EBITDA margin was 14.7%, broadly stable year-on-year and marginally lower quarter-on-quarter amid rising input costs and associated recoveries from OEMs. Total content per vehicle is anywhere around INR 70,000 to INR 75,000 per Passenger Vehicle and about INR 20,000 to INR 22,000 per 2-Wheeler, based on its current basket of products.
The numbers management gave
Results
- Profit After Tax (PAT) was INR 117 crore in Q2 FY 27, up 50% year-on-year.
Show source
The Profit After Tax (PAT) for the quarter stood at INR 117 crore, registering strong growth of 50% y-o-y. For H1 FY 27, revenue stood at INR 2,919 crore, up 34% y-o-y. EBITDA grew by 42% to INR 434 crore, with margins of 14.9%, an expansion of 90 bps (basis points), while PAT grew by 64% to INR 215 crore.
- Consolidated revenue first crossed the INR 1,500 crore mark in a single quarter in Q2 FY 27.
Show source
The consolidated revenue stood at INR 1,556 crore for Q2 FY 27, first time crossing the INR 1,500 crore mark in a single quarter, thereby registering growth of 35% y-o-y. And with respect to six months, up by 34% to INR 2,919 crore, led by consistent scale-up across all product lines and premiumization-led value enhancement.
- Profit Before Tax (PBT) was INR 286 crore for six months, up 60% year-on-year, with a margin of 9.8%.
Show source
Profit Before Tax (PBT) for six months stood at INR 286 crore, up 60% y- o-y, with a margin of 9.8%.
- Share of minority interest was 11% for six months and is expected to be in a similar range going forward, considering the existing structure.
Show source
The share of minority interest for six months stood at 11% and is expected to be in a similar range going forward, considering the existing structure.
- Advanced Plastics segment revenue grew 45% year-on-year in H1 FY 27, increasing from INR 1,138 crore to INR 1,655 crore, led by growth in the IAC (Intelligent Ambient Comfort) business, which commands approximately 60% share in this division.
Show source
With respect to division-wise breakup, beginning with Advanced Plastics, this segment recorded a strong y-o-y growth of 45% in H1 FY 27, with revenues increasing from INR 1,138 crore to INR 1,655 crore, led by strong growth in the IAC (Intelligent Ambient Comfort) business, which Page 4 of 15 Lumax Auto Technologies Limited October 27, 2026 commands approximately 60% share in this division.
- Mechatronics segment revenue grew 45% year-on-year in H1 FY 27, from INR 122 crore to INR 177 crore, with an order book of INR 512 crore.
Show source
The Mechatronics segment sustained its upward momentum, delivering a y-o-y growth of 45% in H1 FY 27, from INR 122 crore to INR 177 crore, with a healthy order book of INR 512 crore.
Show 17 more statements
Results
- Structures & Control Systems vertical grew 24% year-on-year in six months, increasing from INR 380 crore to INR 476 crore, with an order book of approximately INR 150 crore.
Show source
Turning to the Structures & Control Systems vertical, it reported a y-o-y growth of 24% in six months, increasing from INR 380 crore to INR 476 crore, with an order book of approximately INR 150 crore.
- Aftermarket segment grew 9% year-on-year, from INR 216 crore to INR 234 crore, mainly due to a dip in the non-lighting product category as a result of rising input costs.
Show source
The Aftermarket segment showed a growth of 9% y-o-y, from INR 216 crore to INR 234 crore, mainly due to a dip in the non-lighting product category as a result of rising input costs.
- Alternate Fuels business grew 30% year-on-year, from INR 170 crore to INR 220 crore, with an order book of INR 379 crore.
Show source
The Alternate Fuels business showed a growth of 30% y-o-y, from INR 170 crore to INR 220 crore, with an order book of INR 379 crore.
- Raw material price increases passed on to vendors are mostly 100% backed up by OEMs, with at most a single-quarter lag; recoveries from OEMs have occurred for most price lags given to vendors in both quarters, but the delta increased revenue and costs without adding to profitability, raising raw material consumption as a percentage of revenue by a couple of bps for the single quarter and possibly diluting EBITDA margins by 30-40 bps in Q2 FY 27.
Show source
That is why, as a percentage of revenue, you are seeing a couple of bps increase in our raw material consumption for the single quarter and maybe slight dilution in margin, maybe by 30- 40 bps in our EBITDA margins.
- Aftermarket grew about 9% in H1 of the current year and 11% in Q2; inflationary costs passed on dampened demand, specifically in the non-lighting product segment where the company is not the market leader.
Show source
You're right, for H1 of the current year, we've seen Aftermarket grow at about 9% with respect Page 11 of 15 Lumax Auto Technologies Limited October 27, 2026 to last year.
- Revenue was flat year-on-year in H1 FY 27.
Show source
It is a flat revenue on a y-o-y basis for first half.
- For the wiring business division supplying Lumax Industries Limited, revenue growth was flat in the current six months compared with the six months last year because Lumax Industries Limited began procuring one product line from itself at the start of the financial year; on an apple-to-apple basis, growth would be around 25-30%, in line with Lumax Industries Limited's growth.
Show source
And if you see the apple-to- apple, it will be the similar growth of around 25-30%, which is in line with the growth of Lumax Industries as well.
- Consolidated EBITDA was ₹228 crores in Q2FY27, up 34% year-on-year from ₹170 crores in Q2FY26, and its EBITDA margin was 14.7%, broadly stable year-on-year and marginally lower quarter-on-quarter amid rising input costs and associated recoveries from OEMs.
Show source
EBITDA grew by 34% y-o-y to INR 228 crore, with a margin of 14.7%, broadly stable on a y-o-y basis.
- Consolidated EBITDA grew 42% year-on-year to ₹434 crores in H1FY27, with an EBITDA margin of 14.9%, up ~90 bps year-on-year on the back of operational efficiencies, cost optimization and a favorable product mix.
Show source
The Profit After Tax (PAT) for the quarter stood at INR 117 crore, registering strong growth of 50% y-o-y. For H1 FY 27, revenue stood at INR 2,919 crore, up 34% y-o-y. EBITDA grew by 42% to INR 434 crore, with margins of 14.9%, an expansion of 90 bps (basis points), while PAT grew by 64% to INR 215 crore.
- Consolidated PAT (before minority interest) grew 64% year-on-year to ₹215 crores in H1FY27, driven by technologically led operational excellence and improving asset turns and utilizations.
Show source
The Profit After Tax (PAT) for the quarter stood at INR 117 crore, registering strong growth of 50% y-o-y. For H1 FY 27, revenue stood at INR 2,919 crore, up 34% y-o-y. EBITDA grew by 42% to INR 434 crore, with margins of 14.9%, an expansion of 90 bps (basis points), while PAT grew by 64% to INR 215 crore.
- Consolidated revenue from operations was ₹1,556 crore in Q2FY27, up 35% year-on-year from ₹1,156 crore in Q2FY26, and ₹2,919 crore in H1FY27, up 34% year-on-year, reflecting scale-up across core product categories, increasing wallet share with OEMs and premiumization-led value enhancement.
Show source
The consolidated revenue stood at INR 1,556 crore for Q2 FY 27, first time crossing the INR 1,500 crore mark in a single quarter, thereby registering growth of 35% y-o-y. And with respect to six months, up by 34% to INR 2,919 crore, led by consistent scale-up across all product lines and premiumization-led value enhancement.
- Effective tax rate was around 25% in Q1 FY 27 and is expected to hold at similar levels going forward.
Show source
The effective tax rate continues to remain around 25%, which is also expected to hold at similar levels going forward.
- The company says its sales and costs increased by similar amounts, leading to slight dilution in margin.
Show source
This means that the sales and costs has increased by a similar amounts, leading to slight dilution in margin.
- Mechatronics profitability is in line with overall company profitability and is inching closer to it as the segment scales up and reaches critical mass.
Show source
They are inching closer to the overall Lumax Auto Technologies' profitability as we speak.
Money and capital
- Capex on account of capitalization was INR 60 crore during H1 FY 27.
Show source
Capex on account of capitalization during the first quarter was INR 60 crore. [Note: The capex of INR 60 crore pertains to H1 FY 27.]
- The company had free cash reserves of INR 400 crore as of September 2026.
Show source
Free cash reserves stood at INR 400 crore, providing us with the financial flexibility to support ongoing investments and navigate market cycles confidently.
- Long-term debt was INR 442 crore as of September 2026, resulting in a debt-to-equity ratio of 0.26.
Show source
Long-term debt stood at INR 442 crore, resulting in a conservative debt-to-equity ratio of 0.26, which is within our internal comfort threshold.
What it expects ahead
What management expects
- The company expects growth to moderate somewhat in H2 FY 27 as the industry moves past the lower base of H1 and the full benefit of GST rate cuts gets reflected in demand.
Show source
Looking ahead, we do expect growth to moderate somewhat in H2 FY 27 as the industry moves past the lower base of H1 and the full benefit of GST rate cuts gets reflected in demand.
- The company aims for a 20% revenue CAGR between FY 25 through FY 31 and to inch closer to a 20% EBITDA margin over the next 5 to 7 years.
Show source
In the long term, our compass remains our 20.20.20.20 North Star, aiming for a 20% revenue CAGR between FY 25 through FY 31 and inching closer to a 20% EBITDA margin over the next 5 to 7 years.
- The company aspires by FY 31 to more than double its current revenue base to around INR 11,000 crore, fuelled by a blend of organic excellence and strategic inorganic opportunities.
Show source
By FY 31, we aspire to more than double our current revenue base to around INR 11,000 crore, fuelled by a blend of organic excellence and strategic inorganic opportunities.
- Guidance for the year remains around INR 300 crore, including the new greenfield expansion in the Mechatronics, Advanced Plastics and Alternate Fuels divisions, which is expected to begin SOP (Start of Production) in H2 of the financial year.
Show source
The guidance for the year continues to remain around INR 300 crore, including the new greenfield expansion in the Mechatronics, Advanced Plastics and Alternate Fuels divisions, which is expected to begin the SOP (Start of Production) in the H2 of financial year.
- The company expects full-year growth of somewhere in the region of 20%-odd, compared with FY 26, after providing beginning-of-year guidance for growth of 12-14% for this year.
Show source
Page 5 of 15 Lumax Auto Technologies Limited October 27, 2026 However, whatever the industry has performed during the first half of the financial year and considering our H1 performance, we can expect the full-year growth to be somewhere in the region of 20%-odd, if we compare from FY 26.
- The company expects H2 growth to be somewhere between 15-20% year-on-year because of a higher base in FY 26.
Show source
Getting into H2, as I mentioned, because of a higher base in FY 26, we do expect the growth for H2 to be perhaps somewhere between the 15-20% mark on a y-o-y basis.
Show 27 more statements
What management expects
- The company expects full-year revenue growth of 20-25% and revenue close to INR 6,000-odd crore.
Show source
And hence, for the full year, we should be anywhere between a 20-25% growth on a full-year basis on the revenue.
- The company believes the total INR 70,000 to INR 75,000 content per vehicle on a Passenger Vehicle may go up by about 10% or so in the next 2 to 3 years.
Show source
And perhaps in the next 2 to 3 years, the whole INR 70,000-75,000 per vehicle would also maybe go up by about 10% or so.
- The company sees an opportunity to aggregate Mechatronics components with the IAC cockpit solution, which would require vehicle-level endorsement and could make the journey toward 0.5 possible.
Show source
Having said that, there is an opportunity basket that lies along with the aggregation with the IAC cockpit solution, which would require vehicle-level endorsement and the journey toward 0.5 would be eminently possible there.
- The company would like to continue to have an estimated 20% top-line CAGR until FY 31 and is more confident it can achieve this growth through organic growth by itself.
Show source
However, having said that, I think at this point in time, we would like to continue to have a 20% top-line CAGR growth estimated until FY 31.
- The company says a 20% organic CAGR could be achievable if the industry continues to grow with the same momentum; inorganic positions would take growth above 20% CAGR.
Show source
Today, I think the only change point I would like to say is that we are a lot more confident that if the industry continues to grow with the same momentum, a 20% organic CAGR could be achievable.
- Body Control Module (BCM) was always part of its 20% CAGR growth story; the product category was announced more recently, but its development and nominations happened way back.
Show source
So number one, BCM was always a part of this 20% CAGR growth story.
- The company expects Mechatronics to be its fastest-growing vertical and perhaps to reach INR 800 - 1,000 crore revenue of INR 11,000 crore or so in FY 31.
Show source
And hence, we keep saying repeatedly that although on a small base, but we do expect Mechatronics to be the fastest-growing vertical and perhaps inching towards the INR 800 - 1,000 crore revenue of INR 11,000 crore or so in FY 31.
- Internal target is for the total consolidated Mechatronics vertical to contribute 25% from Lumax internal technology-driven initiatives over the 3-year to 4-year outlook, with about 75% relying on design and intellectual-property support from joint venture partners.
Show source
In terms of 3-year to 4-year outlook, the total consolidated Mechatronics vertical is expected to contribute 25%, which is our internal target from the Lumax internal technology-driven initiative.
- Electronics division is focused on scaling across various product categories, likely reaching almost 10 product categories by 2030-31 from 6 currently, with another 3 or 4 to be added.
Show source
And Lumax Auto Technologies' Electronics division is focused accordingly to scale it up across various product categories, probably going up to almost like 10 product categories by 2030-31.
- The company has narrowed its EV component strategy to 3 to 5 products, is sourcing technology and considering inorganic measures, and is exploring entry into active SOPs during 2028 to 2030.
Show source
We have now zeroed down on our EV component strategy to a list of product basket of 3 to 5 products where we are now sourcing technology and looking at certain inorganic measures also, which continues to be an exploratory area to get into active SOPs during the 2028 to 2030 period.
- The company expects its new product basket under the electronics and Mechatronics business verticals to enhance content per vehicle by about 10-15% from the current level of INR 70,000-odd on a Passenger Vehicle.
Show source
And as I mentioned earlier, thereafter, with the new product basket, which we are getting into under the whole electronics and Mechatronics business verticals, we should then also be able to enhance our content per vehicle by about 10-15% from the current level of INR 70,000-odd on a Passenger Vehicle.
- The company remains hopeful for the full year and is optimistic about delivering 15-20% growth in the Aftermarket on a 3 to 5-year horizon, supported by secondary demand generation and penetration into newer product lines.
Show source
However, with the focus on secondary demand generation and also to penetrate into newer product lines, on a 3 to 5-year horizon, I still remain quite optimistic to deliver a 15-20% growth on the Aftermarket.
- The company will have significant capacity utilization between Mahindra and Maruti Suzuki over the next, give or take, 2 years, and then will see if it is able to expand ferrule-less tubes and fittings to other OEMs.
Show source
So I think we will right now have a significant capacity utilization between Mahindra and Maruti Suzuki over the next, let's say, give or take, 2 years.
- The company is targeting an EBITDA margin between 15.5% and 16% for FY 28, with an EBITDA number closer to INR 1,000 crore based on a similar CAGR to FY 27.
Show source
Having said that, I think we remain quite confident for the remaining part of FY 27, and we are quite confident of delivering the absolute guidance of EBITDA for FY 28, which was always at about INR 1,000 crore EBITDA.
- The company expects its Mechatronics division to generate anywhere around INR 400 crore of revenue in this fiscal year and close to INR 1,000 crore of top line by FY 2030-31.
Show source
But as I said, under the whole theme of BRIDGE, which is a whole roadmap for diverse growth engines, I think all of them are trying to unlock the maximum potential of growth and I think Greenfuel and Mechatronics, along with IAC would be some of the key growth drivers, where I have already said, the Mechatronics, the growth would be outperforming the other divisions, although on a small base, but again, we are expecting perhaps close to INR 1,000 crore revenue from Mechatronics as a business vertical by 2031.
- The company is confident it can pass through and recover almost all inflationary costs from OEMs in subsequent quarters as well.
Show source
Anmol Jain: We remain confident that almost all of the inflationary costs we should be able to pass through to OEMs and recover them in the subsequent quarters as well.
- The company expects to provide details of the efficiencies gained through its centre of competence concept once Plant IV launches. Replaced by a later filing.
Show source
And I think once Plant IV launches, we will be able to actually give you some details as a result of COC, how much efficiency we have gained through this concept.
Orders
- Order book was INR 1,879 crore at the end of Q2, up from INR 1,600 crore at the end of Q1 FY 27.
Show source
Coming to the order book, it has grown to INR 1,879 crore at the end of Q2, up from INR 1,600 crore at the end of Q1 FY 27, providing a healthy visibility for the business going forward.
- Order book comprised Advanced Plastics 44%, Mechatronics 27%, Alternate Fuels 20% and Structures & Control Systems 8%.
Show source
Advanced Plastics continues to contribute the largest share at 44%, followed by Mechatronics at 27%, Alternate Fuels at 20% and Structures & Control Systems at 8%.
- Around 85% of Lumax Auto Technologies Limited's order book was new business.
Show source
Around 85% of the order book is new business.
- EV (Electric Vehicle) and CNG (Compressed Natural Gas) together accounted for 29% of Lumax Auto Technologies Limited's order book, with CNG at 20% and pure EVs at about 9%; new future technologies accounted for 22% of the total order book.
Show source
By powertrain, EV (Electric Vehicle) and CNG (Compressed Natural Gas) together accounts for 29% of the order book, with CNG at 20% and pure EVs at about 9%, while new future technologies account for 22% of the total order book.
- Advanced Plastics order book was INR 834 crore.
Show source
The order book remains strong at INR 834 crore, providing solid future visibility.
- BCM business has an order book backing its scale-up; its won and acquired programs are already on an INR 250 crore order book, supporting the launch of the new Mechatronics plant, and the company remains hopeful of probably doubling this revenue by 2031.
Show source
In terms of the won and the acquired program, we are already on a INR 250 crore order book with which confidence we are kicking off the new Mechatronics plant, which has been announced in the results.
- The company expects approximately 14% of its order book to be executed in FY 27, 59% in FY 28, and the remaining 27% in FY 29.
Show source
Of this order book, approximately 14% is expected to be executed in FY 27 itself, 59% in FY 28 and the remaining 27% in FY 29.
- The company is currently on an INR 400 crore to INR 500 crore order book, which will continue to be a growth driver going ahead.
Show source
We are sitting on a INR 500 crore order book.
- Greenfuel business has a strong order book based on localization of ferrule-less tubes & fitting, and the company expects to significantly ramp up that business vertical.
Show source
Similarly, Greenfuel also has now a very strong order book based on the localization of the ferrule-less tubes & fitting, and we should be able to significantly ramp up that business vertical as well.
- The company has firm order wins with Maruti Suzuki to supply ferrule-less tubes and fittings.
Show source
With Maruti Suzuki also, there have been some firm order wins to supply the ferrule-less tubes and fittings.
What it is building and selling
Projects and capacity
- Lumax Greenfuel Energy Solutions commenced production at its Nashik facility in Q3 FY 27, supplying ferrule-less tubes and fittings and receptacles to Mahindra & Mahindra.
Show source
At Lumax Greenfuel Energy Solutions, we are pleased to report that the Nashik facility has commenced production in Q3 FY 27, the ongoing quarter, supplying ferrule-less tubes and fittings and receptacles to Mahindra & Mahindra.
- At its meeting on 24th October, 2026, the Board approved setting up a new Mechatronics manufacturing facility at Manesar in Haryana with a capital outlay of around INR 150 crore, to be funded through a mix of debt and internal accruals.
Show source
At its meeting on 24th October, 2026, the Board approved the setting up of a new Mechatronics manufacturing facility at Manesar in Haryana, with a capital outlay of around INR 150 crore to be funded through a mix of debt and internal accruals.
- The new Mechatronics manufacturing facility of Lumax Auto Technologies Limited in Manesar, Haryana is expected to be commissioned in 2 phases starting Q3 FY 2028.
Show source
It is expected to be commissioned in 2 phases, starting Q3 FY 28, with a peak annual turnover of around INR 500 crore post-commissioning.
- The new Mechatronics manufacturing facility of Lumax Auto Technologies Limited in Manesar, Haryana is expected to have peak annualized turnover of around Rs. 500 Crores post commissioning.
Show source
It is expected to be commissioned in 2 phases, starting Q3 FY 28, with a peak annual turnover of around INR 500 crore post-commissioning.
- Chakan IV facility is in the SOP phase, with product launch expected more toward December, January.
Show source
Sunil Koparkar: Just to discuss the point Mr. Anmol Jain said, the Chakan IV facility is in the SOP phase, but the product launch will actually happen more towards December, January.
- SHIFT will have a lot of integration on the technology piece over time. Replaced by a later filing.
Show source
And also our SHIFT will, over time, have a lot of integration on the technology piece.
Show 14 more statements
Demand and pricing
- The company says the festive season will be an important monitorable for assessing whether current demand momentum sustains.
Show source
The festive season will be an important monitorable, particularly in assessing whether the current demand momentum sustains.
- The company says OEMs looking at aggregated parts would naturally expect more cost benefits, bringing in a volume-scale-cost dynamic, and the company will take the right decisions accordingly. Replaced by a later filing.
Show source
So OEMs also, when they are looking at the aggregated parts, would naturally expect more cost benefits and there the volume- scale-cost game will then kick in, and your Company will take the right decisions accordingly.
Segments
- Total content per vehicle is anywhere around INR 70,000 to INR 75,000 per Passenger Vehicle and about INR 20,000 to INR 22,000 per 2-Wheeler, based on its current basket of products.
Show source
Anmol Jain: So just to give you a sense, let us say the total content per vehicle, which is the playbook for Lumax Auto Technologies, is anywhere around INR 70,000 to INR 75,000 per Passenger Vehicle and about INR 20,000 to INR 22,000 per 2-Wheeler.
- Almost close to 50% of Lumax Auto Technologies Limited's content per vehicle on the Passenger Vehicle side rests within the IAC vertical, while Greenfuel would be close to about INR 5,000, INR 7,000 or INR 8,000 per vehicle.
Show source
However, let us say, almost close to 50% of this content per vehicle on the Passenger Vehicle side rests within the IAC vertical and Greenfuel would be close to about INR 5,000, INR 7,000 or INR 8,000 per vehicle, and the remaining is all divided between the Control Systems, Transmission and Mechatronics.
- The company says Mechatronics will have one of the highest content-per-vehicle contributions given its range of products, and that the content per vehicle would go up as it moves into high-electronic components such as the Body Control Module.
Show source
And as we move forward into high-electronic components like as the Body Control Module, this would only go up.
- Mechatronics vertical has five global partnerships: Alps Alpine, Yokowo in connectivity systems, Ituran in telematics, Nidec on Body Control Modules, and FAE in the oxygen sensor segment; the company continues to explore new partnerships.
Show source
Vikas Marwah: So, Mechatronics vertical today is resting on 5 global partnerships with 5 major global players who are the market leaders in their segments.
- For Lumax Auto Technologies Limited's Mechatronics products, some product lines have technology led by the joint venture partner, with the intellectual property held in the respective joint venture.
Show source
Number one, there are certain product lines which the technology lead is driven by the joint venture partner and the IP (Intellectual Property) sits in the respective joint venture.
- SHIFT (Smart Hub for Innovation and Future Trends) internal innovation and technology centre works on technologies, more on electronic components, for production in standalone entities or facilities, and can home-grow some technologies; product growth from both SHIFT-led and joint-venture-partner-led technologies will contribute to the Mechatronics vertical.
Show source
So again, it will be a mixed bag, but both, whether the technology is home-grown at SHIFT or it is led by the joint venture partner, the growth from these products will kick into the Page 9 of 15 Lumax Auto Technologies Limited October 27, 2026 Mechatronics vertical.
- The company entered SOP for the BCM product sometime in July this year and is still scaling up.
Show source
We went into the SOP sometime in July this year.
- Body Control Module business revenues and profitability will be under the standalone and the business will be under the Mechatronics division.
Show source
All the revenues and profitability of business from Body Control Module business would be under the standalone.
- Mechatronics business will include both subsidiaries and standalone revenue.
Show source
So it will have both the subsidiaries and the standalone revenue, the Mechatronics business.
Deals and partners
- The company has a technology tie-up, not a joint venture, with a large Japanese auto component maker, and will localize manufacturing on its behalf using technology from the partner.
Show source
However, we will be localizing the manufacturing on their behalf.
- The company has started supplying ferrule-less tubes and fittings to Mahindra & Mahindra along with receptacles as a whole CNG system.
Show source
However, we have already started, as I mentioned in my opening, the supply of the ferrule-less tubes and fittings to Mahindra & Mahindra, along with the receptacles as a whole CNG system.
- The company remains engaged with Hyundai for ferrule-less tubes and fittings and certain other CNG parts. Replaced by a later filing.
Show source
We do remain engaged with other OEMs like Hyundai as well, but not just for ferrule-less tubes and fittings, but also for certain other CNG parts.
Risks, rules and outside factors
Outside factors
- The company says supply chain inflationary costs continue to pressure margins; most of these inflationary costs have been passed through to OEMs, with a lag of about 1 quarter or so that dilutes margins by a few bps.
Show source
Hence, margins get diluted by few bps.
- The company says manufacturers' ability to manage rising input costs and pass them on to customers will remain important for profitability. Replaced by a later filing.
Show source
At the same time, the ability of manufacturers to manage rising input costs and pass them on to customers will remain important for profitability.
Everything else said on the call
What management stressed
- The company will continue to monitor input cost trends and focus on profitable growth for the remaining part of the year. Replaced by a later filing.
Show source
We will continue to monitor these input cost trends and focus on profitable growth for the remaining part of the year.
Group structure
- One Lumax Auto Technologies Limited joint venture was dissolved in the last quarter, by mutual consent, because JOPP of Germany's technology portfolio and the scalability ambitions of both partners were not aligned.
Show source
With mutual consent, one JV was dissolved in the last quarter.
- The separation with JOPP of Germany was amicable. Replaced by a later filing.
Show source
So it was an amicable separation that has happened.
What the company said on its earnings call, taken from its own transcript. Not advice.
Questions and answers
Question
Amit Hiranandani: Congratulations on one more outperformance in Q2. Sir, my first question is basically, after this 34% of y-o-y growth achievement in the first half, so are we revising our guidance upward for this fiscal year?
Answer, ankit thakral
Ankit Thakral: Amit, this is Ankit here. So at the beginning of the year, we basically provided the guidance, in line with our North Star that if we combine growth for 2 years, which is FY 26 and FY 27, we will be comfortably in line with the overall guidance of 20%-odd. And considering the 35-36% growth which was done in FY 26, if you do the mathematics, the growth for this year at the beginning of the year was somewhere closer to 12-14%. Page 5 of 15 Lumax Auto Technologies Limited October 27, 2026 However, whatever the industry has performed during the first half of the financial year and considering our H1 performance, we can expect the full-year growth to be somewhere in the region of 20%-odd, if we compare from FY 26.
Answer, anmol jain
Anmol Jain: Amit, this is Anmol here. Just to add to that, H1 you've seen a 34% growth on a y-o-y basis. Getting into H2, as I mentioned, because of a higher base in FY 26, we do expect the growth for H2 to be perhaps somewhere between the 15-20% mark on a y-o-y basis. And hence, for the full year, we should be anywhere between a 20-25% growth on a full-year basis on the revenue. So, looking at perhaps close to a INR 6,000-odd crore, given that growth number.
Question
Amit Hiranandani: Yes. Sir, secondly, are we witnessing any incremental immediate pressures on margins for Q3? And are we on track to achieve this FY 28 absolute EBITDA target?
Answer, anmol jain
Anmol Jain: So, yes, margin pressures on supply chain inflationary costs continues. However, the same was also witnessed in H1, and most of these inflationary costs, we have been able to pass through to our OEMs. However, there is a lag of about 1 quarter or so, as Ankit mentioned, because the whole revenue goes up because of these price escalations and inflationary costs and so does the denominator. Hence, margins get diluted by few bps. Having said that, I think we remain quite confident for the remaining part of FY 27, and we are quite confident of delivering the absolute guidance of EBITDA for FY 28, which was always at about INR 1,000 crore EBITDA. We remain quite confident to achieve that in FY 28.
Question
Radha: Congratulations on stellar results. Sir, could you help us understand the content per vehicle that Lumax addresses today across each Mechatronics JV (Joint Venture), that is Alps Alpine, Ituran, Yokowo and FAE? And with multiple product launches planned, where do you see Lumax's Mechatronics content per vehicle to reach in the next 2 to 3 years?
Answer, anmol jain
Anmol Jain: So just to give you a sense, let us say the total content per vehicle, which is the playbook for Lumax Auto Technologies, is anywhere around INR 70,000 to INR 75,000 per Passenger Vehicle and about INR 20,000 to INR 22,000 per 2-Wheeler. This is based on the basket of products Lumax Auto Technologies is in currently. I would not be able to give you an exact content per vehicle because there are multiple parts across different, different joint ventures and subsidiaries. However, let us say, almost close to 50% of this content per vehicle on the Passenger Vehicle side rests within the IAC vertical and Greenfuel would be close to about INR 5,000, INR 7,000 or INR 8,000 per vehicle, and the remaining is all divided between the Control Systems, Transmission and Mechatronics. Page 6 of 15 Lumax Auto Technologies Limited October 27, 2026 The Mechatronics will have one of the highest content-per-vehicle of that, just given the sheer range of products. And as we move forward into high-electronic components like as the Body Control Module, this would only go up. So, we do believe that, at INR 70,000 to INR 75,000 on a Passenger Vehicle, the fastest content per vehicle driver would be the Mechatronics vertical.
Answer, anmol jain
And perhaps in the next 2 to 3 years, the whole INR 70,000-75,000 per vehicle would also maybe go up by about 10% or so. Radha: That's helpful, sir. But, sir, just for rough calculations, can we assume 15% of the INR 70,000- 75,000 comes from Mechatronics as of now?
Answer, vikas marwah
Vikas Marwah: So Ms. Radha, I think closer to a 20% contribution would come from Mechatronics right now. And as Mr. Anmol Jain said, this is still a very, very high-growth vertical, with new product categories in the connected-vehicle space, and the vehicle ECU (Electronic Control Unit) interface management space, the new products are on the radar. It will continue to grow further. As of today, it stands at 20%, yes. Radha: Sir, second is in Mechatronics, could you help us understand, how do we plan to progress from supplying individual components like antennas, telematics etc., to customers to a more Tier 0.5 solution more value-add, etc., to the OEMs and how can this be viewed as a trigger to strengthen our competitive position and segmental margin?
Answer, vikas marwah
Vikas Marwah: So, Mechatronics vertical today is resting on 5 global partnerships with 5 major global players who are the market leaders in their segments. You are right, one of them is Alps Alpine, then we have Yokowo in connectivity systems. We have Ituran on the telematics side, and we have got Nidec there on the Body Control Modules. And we also have FAE in the oxygen sensor segment, and we continue to explore new partnerships. Most of these component categories are not connected to each other, except through a vehicle interface or the ECU management system that comes from the OEMs. Having said that, there is an opportunity basket that lies along with the aggregation with the IAC cockpit solution, which would require vehicle-level endorsement and the journey toward 0.5 would be eminently possible there. However, let us remain cognizant of the fact that each of these individual categories, when marketed to the OEMs right now, get us a higher value addition.
Answer, vikas marwah
So OEMs also, when they are looking at the aggregated parts, would naturally expect more cost benefits and there the volume- scale-cost game will then kick in, and your Company will take the right decisions accordingly.
Answer, ankit thakral
Thank you, Ms. Raksha. So the answer to your question is that, as I mentioned during my opening remarks that whatever raw material costs we have passed on to our vendors, most of them are being 100% backed up by the OEMs. Only thing is, there may be maximum a single quarter lag. However, with respect to whatever the price lag has been given to vendors in both the quarters, most of it, recoveries have happened from the OEM. Say for example, if we have given INR 100 as a raw material price increase, we have been able to recover that INR 100. But that delta has hit into the revenue, with similar increase in costs and zero addition to profitability. That is why, as a percentage of revenue, you are seeing a couple of bps increase in our raw material consumption for the single quarter and maybe slight dilution in margin, maybe by 30- 40 bps in our EBITDA margins.
Answer, anmol jain
Anmol Jain: We remain confident that almost all of the inflationary costs we should be able to pass through to OEMs and recover them in the subsequent quarters as well.
Question
Raksha Srivastava: My second question would be, how is the capacity utilization ramping up at the new Chakan plant supplying M&M? Also, what are cost savings or efficiencies we have achieved in Q2 FY 27?
Answer, anmol jain
Anmol Jain: So, maybe I will request Sunil to answer that. I'm assuming you were specifically talking about the new IAC division facility in Chakan, I'll hand it over to Sunil because I believe the facility is still under commissioning. So Sunil, if you can just throw some colour on that? Sunil Koparkar: Just to discuss the point Mr. Anmol Jain said, the Chakan IV facility is in the SOP phase, but the product launch will actually happen more towards December, January. Talking about efficiencies, over the last few years, we have been trying to do is, align our production facilities to more like a centre of competence (COC) concept to gain the efficiencies. And I think once Plant IV launches, we will be able to actually give you some details as a result of COC, how much efficiency we have gained through this concept. But at this point, it is under production, and we will not be able to say much more.
Answer, anmol jain
Anmol Jain: So Deep, again, I think when we gave that guidance, we said 2-3 things. Number one, we will continue to outperform the industry growth. That's number one. And I don't think the industry is Page 8 of 15 Lumax Auto Technologies Limited October 27, 2026 likely to continue to grow at 12-15% over FY 25 through FY 31 because the base also consistently keeps going up. However, having said that, I think at this point in time, we would like to continue to have a 20% top-line CAGR growth estimated until FY 31. However, I also mentioned that we are likely to double our revenue base to probably more like INR 11,000 crore in FY 31. So again, at the right time, we might have a revision to these CAGR numbers, but we do feel a lot more confident on today, achieving this kind of growth of 20% CAGR through organic growth by itself.
Answer, anmol jain
I think in the earlier calls, I would have said that probably a 15% CAGR is more achievable through organic routes and inorganic further acquisitions would entail maybe another 5-7% of the CAGR. Today, I think the only change point I would like to say is that we are a lot more confident that if the industry continues to grow with the same momentum, a 20% organic CAGR could be achievable. And if we were to take positions inorganically, it should then cross the 20% CAGR to higher and deliver top line growth.
Question
Deep Shah: Okay. Got it. My second question is more qualitative on Mechatronics, like you said, a new plant for Body Control Modules, etc. So I mean, just want to understand the product development. Is it done in-house or is it again with the 4 JVs that we have? And is that also included in the historical guidance of about INR 1,000 crore revenue for Mechatronics by FY 31. So BCM is a part of that or is it something new? And just like more qualitative information on these new products on the Mechatronics side?
Answer, anmol jain
Anmol Jain: Sure. So I'll take this partially, and then maybe I'll request Vikas to jump in. So number one, BCM was always a part of this 20% CAGR growth story. We've probably gone and announced the BCM as a product category more recently. But again, the development and the nominations happened way back. Number two, most of the Mechatronic products, and there is a two-pronged approach. Number one, there are certain product lines which the technology lead is driven by the joint venture partner and the IP (Intellectual Property) sits in the respective joint venture.
Answer, anmol jain
However, at the same time, our internal innovation and technology centre, which is SHIFT (Smart Hub for Innovation and Future Trends), is also working on a lot of technologies, more on electronic components, which would then get productionized in one of the standalone entities or the standalone facilities. And hence, they will also be able to home-grow certain technologies. So again, it will be a mixed bag, but both, whether the technology is home-grown at SHIFT or it is led by the joint venture partner, the growth from these products will kick into the Page 9 of 15 Lumax Auto Technologies Limited October 27, 2026 Mechatronics vertical. And hence, we keep saying repeatedly that although on a small base, but we do expect Mechatronics to be the fastest-growing vertical and perhaps inching towards the INR 800 - 1,000 crore revenue of INR 11,000 crore or so in FY 31.
Answer, vikas marwah
Vikas Marwah: So, I will just add to what Mr. Anmol Jain just mentioned. In terms of 3-year to 4-year outlook, the total consolidated Mechatronics vertical is expected to contribute 25%, which is our internal target from the Lumax internal technology-driven initiative. And about 75% would rest with the design and the IP support coming in from our joint venture partners. That's an internal target. And Lumax Auto Technologies' Electronics division is focused accordingly to scale it up across various product categories, probably going up to almost like 10 product categories by 2030-31. We are currently on 6 product categories. We will add another 3 or 4.
Question
Deep Shah: Just one last question on Mechatronics margins. How high are the margins compared to our current EBITDA margins of 14.5-15%?
Answer, vikas marwah
Vikas Marwah: So they are in line very much. Mechatronics is still scaling up. We are reaching critical mass. We are sitting on a INR 500 crore order book. They are inching closer to the overall Lumax Auto Technologies' profitability as we speak.
Answer, vikas marwah
Vikas Marwah: Apurva-ji, this is Vikas Marwah, and thank you for your remarks. Coming back to EV, which is a familiar question. We have clarified it over the previous quarter's earnings calls also that while continuing to scale on a North Star vision of 20.20.20.20 and registering these kind of growth numbers and coming closer to now 15% EBITDA and probably beyond, we have been very prudent in terms of balancing our priorities towards what we see as the future critical and what is presently critical to us. Accordingly, electronification and powertrain agnostic products have continued to remain on our radar. While there is a definite scaling up on the 2-Wheeler side in terms of the EV components and slight increase in the numbers or even on the 4-Wheeler, a lot of them continue to be commodity-based purchases where OEMs would like to maintain a stranglehold and the automotive components really don't have much to supply there being out of the battery-related solutions and everything. We have now zeroed down on our EV component strategy to a list of product basket of 3 to 5 products where we are now sourcing technology and looking at certain inorganic measures also, which continues to be an exploratory area to get into active SOPs during the 2028 to 2030 period.
Answer, vikas marwah
We have our hands completely full on electronification of the vehicles right now with the products that we have, and I think that's the right strategy. Page 10 of 15 Lumax Auto Technologies Limited October 27, 2026 Apurva Mehta: Great.
Question
And can you throw some light on each of our JVs like Greenfuel, Mannoh? Where you look all these companies for next 2 years kind of thing, like Greenfuel, Mannoh, Alps Alpine, Cornaglia, FAE, Ituran?
Answer, anmol jain
Anmol Jain: So I'll just give you a broader sense. I think rather than going into each and every company, I think, of course, each company has its own playbook over the next 5-6 years. Some of them are matured and already high wallet share companies like Lumax Mannoh, where the growth would be very different than some of the Mechatronics vertical companies like Lumax Alps or Lumax Yokowo. But as I said, under the whole theme of BRIDGE, which is a whole roadmap for diverse growth engines, I think all of them are trying to unlock the maximum potential of growth and I think Greenfuel and Mechatronics, along with IAC would be some of the key growth drivers, where I have already said, the Mechatronics, the growth would be outperforming the other divisions, although on a small base, but again, we are expecting perhaps close to INR 1,000 crore revenue from Mechatronics as a business vertical by 2031. Similarly, Greenfuel also has now a very strong order book based on the localization of the ferrule-less tubes & fitting, and we should be able to significantly ramp up that business vertical as well. So I think there is a great opportunity for us to, first and foremost, accelerate the growth in certain business verticals.
Answer, anmol jain
And as I mentioned earlier, thereafter, with the new product basket, which we are getting into under the whole electronics and Mechatronics business verticals, we should then also be able to enhance our content per vehicle by about 10-15% from the current level of INR 70,000-odd on a Passenger Vehicle. Apurva Mehta: And on the margin front, as we scale up this Mechatronics, are the margins also will come in line with what we are there currently, around 15-16% kind of margins can we foresee?
Answer, anmol jain
Anmol Jain: Yes, absolutely. I think we are quite confident that the current margins, which we've clocked and delivered should be able to sustain for the remaining part of the year. And for the full year also, I think the guidance remains unchanged. We should be able to continue that margin. Despite the volatility, I'm quite confident that we should be able to maintain the margins. And going forward, I think the whole ambition and aspiration is to try and move the margin further by at least 100-200 bps over the next few years and inch them closer to like a 17-18%, something like that framework.
Question
Apurva Mehta: And on the Aftermarket side of the business, where our aspiration is always to grow 20%. This quarter, this first half, we are being low on that. What are the steps taken to make sure that Aftermarket grows at more than 20% and like adding new products or widening of the market or how can we do that?
Answer, anmol jain
Anmol Jain: So I think Aftermarket is a very different animal. I think it needs a very different treatment. You're right, for H1 of the current year, we've seen Aftermarket grow at about 9% with respect Page 11 of 15 Lumax Auto Technologies Limited October 27, 2026 to last year. But I think Q2 per se was a better quarter where we grew at 11%. And again, for the full year, we still remain hopeful, and there were 2 primary reasons. Number one, as I said, a lot of the inflationary costs were passed on and that kind of dampened the demand, specifically in the non-lighting product segment where we are not the market leaders. However, with the focus on secondary demand generation and also to penetrate into newer product lines, on a 3 to 5-year horizon, I still remain quite optimistic to deliver a 15-20% growth on the Aftermarket.
Question
Amit Hiranandani: Sir, on the BCM product, so the competition is also intense here. So I just want to confirm whether do we have the confirmed orders in hand and in which subsidiary this product will get reported?
Answer, vikas marwah
Vikas Marwah: So Amit, this is Vikas Marwah. Thank you for your question. BCM is a very, very new and the prestigious entry for Lumax. We went into the SOP sometime in July this year. We are still scaling up. You are right, we are up against global competition here, but the comfort is that the technology is coming again from a global leader. This is not a joint venture right now.
Answer, vikas marwah
It is standalone revenue for Lumax Auto Technologies, and we are extremely proud of it. In the scale-up phase, it is currently build-to-print. We are imbibing the technology. We are learning with it. We are scaling it up, and you are right, there is an order book that is backing up to support it. In terms of the won and the acquired program, we are already on a INR 250 crore order book with which confidence we are kicking off the new Mechatronics plant, which has been announced in the results. And we continue to remain hopeful of probably doubling up this revenue by 2031.
Answer, vikas marwah
But this is the first 6 months of the launch.
Question
Amit Hiranandani: Sir, can I just clarify? You said there is a tech with a global leader. So can you please clarify here, which OEM we have tie up?
Answer, anmol jain
Anmol Jain: It's not an OEM. It's actually another electronics component manufacturer. We would not be able to give you the name yet. However, it's a large Japanese auto component maker. So again, it's more of a technology tie-up, not a joint venture. However, we will be localizing the manufacturing on their behalf. And again, the technology will be kind of coming from the technology partner.
Answer, anmol jain
And also our SHIFT will, over time, have a lot of integration on the technology piece.
Show 4 more questions
Question
Amit Hiranandani: And this will be reported in the standalone, you said?
Answer, anmol jain
Anmol Jain: That is correct. All the revenues and profitability of business from Body Control Module business would be under the standalone. Page 12 of 15 Lumax Auto Technologies Limited October 27, 2026 Ankit Thakral: And with respect to the division-wise breakup, it will be under the Mechatronics division.
Answer, ankit thakral
So it will have both the subsidiaries and the standalone revenue, the Mechatronics business.
Question
Amit Hiranandani: Yes.
Answer, ankit thakral
Ankit Thakral: So Lumax with respect to the Lumax Industries Limited, so...
Answer, anmol jain
Anmol Jain: I think in the H1, the growth is flat. We have really not grown our revenue. It is a flat revenue on a y-o-y basis for first half.
Question
Amit Hiranandani: Yes. So this was basically my follow-up question. What is exactly happening here? I mean the growth is flat here.
Answer, ankit thakral
Ankit Thakral: For the current six months, this is basically the wiring business division, which we are catering to Lumax Industries Limited. And if we go back to the six months last year, there was another sort of one more product line, which we were supplying to Lumax Industries. But at the start of the financial year, Lumax Industries is procuring from themselves. So that is why if you compare from last financial year, it is a flat growth. And if you see the apple-to- apple, it will be the similar growth of around 25-30%, which is in line with the growth of Lumax Industries as well.
Question
Radha: Sir, could you give us some colour on the adoption of ferrule-less tubes across new customers besides Maruti and also penetration in some of the new customers like Hyundai, etc., from the Greenfuel division?
Answer, anmol jain
Anmol Jain: Radha, on the ferrule-less tubes and fittings, industry at large was importing this ferrule-less tubes from outside of India. We were and are the first company to have localized the manufacturing of ferrule-less tubes and fittings. And at an industry level, I mean, if you look at the penetration of CNG, every vehicle has the ferrule-less tubes and fittings. It multiplies either in 3 or 4 or 6 per vehicle depending on the layout. However, we have already started, as I mentioned in my opening, the supply of the ferrule-less tubes and fittings to Mahindra & Mahindra, along with the receptacles as a whole CNG system. With Maruti Suzuki also, there have been some firm order wins to supply the ferrule-less tubes and fittings. The scalability of this is sizable as a growth driver under the CNG business vertical because, again, it's a win-win for the OEM as well as for us.
Answer, anmol jain
So OEM also gets a lot of localized price advantage and localized supplies, whereas for us, this is a growth driver on the whole theme of localization. So I think we will right now have a significant capacity utilization between Mahindra and Maruti Suzuki over the next, let's say, give or take, 2 years. Page 13 of 15 Lumax Auto Technologies Limited October 27, 2026 And then we will see if we are able to expand this to others. We do remain engaged with other OEMs like Hyundai as well, but not just for ferrule-less tubes and fittings, but also for certain other CNG parts. Radha: Sir, secondly, globally, Alps Alpine has a lot of products in smartphones and Greenfuel's partner also has applications in industrial air conditioning industry, etc. So given some of the products can be used across industries, do we plan to tap these opportunities in India or solely focus on automotive?
Answer, anmol jain
Anmol Jain: As of now, our singular focus is to try and capitalize the opportunities that exist in the automotive space. And again, we would like to be laser sharp focused on automotive and deliver the growth numbers which we are promising. I think there is a lot more opportunity to grow even higher within the automotive landscape. So that would be our focus area for now. Radha: And sir, lastly, the partnerships that Lumax has across various partnerships that you mentioned, are these partnerships exclusive to Lumax in India? And secondly, do you see any risk from the deterioration of the financial condition of any of the partner globally to impact our Company or any risk from that angle in the near term or in the medium term to impact Lumax?
Answer, vikas marwah
Vikas Marwah: So Ms. Radha, I think we are very proud of the fact that Lumax has always been extremely prudent in terms of choosing its international partners. In the flagship company, Lumax Industries, the partnership is actually so many decades old that we can't even tell you. I mean, it will be probably closing 50 years at some point of time. With a world leader. After that, all the Lumax Auto Technologies joint venture partners who have come on board, most of them are global market leaders in their space with no financial distress, long-term enduring sustaining partnerships for India. With mutual consent, one JV was dissolved in the last quarter. That was with JOPP of Germany due to their technology portfolio at that point of time and the scalability ambitions of both the partners not aligning.
Answer, vikas marwah
So it was an amicable separation that has happened. Having said that, all the partnerships that we have are of very, very high standing.
Answer, anmol jain
Anmol Jain: Thank you once again for joining us for the Q2 and H1 FY 27 earnings call and for your continued interest in Lumax Auto Technologies. We truly appreciate your time and engagement today. Should you have any further questions or require any additional information, please feel free to reach out to the Lumax Group Investor Relations team or SGA, our Investor Relations Advisors. We are committed to keeping the investor community regularly updated on our progress. Thank you, and I also take this opportunity to wish you a very happy festive season. Thank you very much. Page 14 of 15 Lumax Auto Technologies Limited October 27, 2026 Moderator: Thank you.
Questions about this call
- When was the Lumax Auto Technologies Q2 FY27 earnings call transcript filed?
- Lumax Auto Technologies filed the transcript with the exchange on 3 Nov 2026. This page is built from that transcript.
- What does this page list?
- 81 statements from the transcript across 11 topics, 57 of them with a figure. Each statement is shown with the transcript sentence it came from.
- Are the analysts' questions included?
- Yes. 14 questions and management's answers are listed in the order they were asked, as the transcript prints them.
- Who wrote this page?
- DalalOS Data Desk. Assembled by software from the company's transcript. Not reviewed by a person. How it is made, and what it leaves out, is on the method page linked from the byline.